|
[调查]大家觉得画uml图什么工具比较好用?
Enterprise Architect |
|
c32asm软件中查看到的地址如何转换成OD的地址?
貌似楼主打开方式选错了打开方式,应选择反汇编模式打开文件。 |
|
[讨论]0day 2 已经准备入手 看了目录感觉还不错,
楼主努力研究。ios5.0.1,迫切需要0day |
|
xxxxxxxxxxxx
在火星上的人就是深刻 |
|
[下载]MDebug 1.02 更新
新的建议: 建议在“模块”窗口右键中增加一个功能,”标记为系统模块“,当一个模块被标记为系统模块后, 在跟踪,或其它行为时,可以单独处理,比如单步时,如果下一指令中Call 系统模块,则直接步过等等。。。。 当然这些功能可以用插件实现,版主斟酌吧:) |
|
[下载]MDebug 1.02 更新
版主:请教,“6.增加脚本本身可以进行调试的功能” 能查看脚本变量的值吗? |
|
[下载]MDebug 1.02 更新
嗯:) 您可以用MD载入MD, 停在 _WinMain: 0047D650 push dword ptr [esp+0x10] 0047D654 push dword ptr [esp+0x10] 0047D658 push dword ptr [esp+0x10] 0047D65C push dword ptr [esp+0x10] 选中第一行的 “0x10” 右键-> 再按一下“TAB”键 试试 |
|
[下载]MDebug 1.02 更新
12、右键菜单对比 13、建议: 正在调试程序时,再打开一个程序,会提示“程序正在调试中,请先停止调试-确定” 改为“程序正在调试中,要停止并载入新程序吗?-确定,取消”,确定后,载入新的程序,取消,则无动作,并在“设置面板中加个选项,“当调试器忙时,载入新程序是否提示”” 14、建议: 正在调试程序时,关闭,会提示, 在“设置面板中”添加一个选项,“关闭活动进程时警告” 后面几个建议全是细节问题,版主记录下有时间再修改吧:)别扰乱了您的思路。 |
|
[建议]代码分析、工作区自动保存、内存窗口宽度等
哈哈,如何复制版主的使用习惯(思路),或版主如何推广您的习惯,应该好好考虑一下:) 如果大家能有与您一样的md使用习惯,估计也会“我个人觉得md比od好用多了” PS:突然想起来,有个HIPS软件的简称也是“MD” :) |
|
[下载]MDebug 1.02 更新
谢谢版主的回复,您的回复是提建议的动力 3.刚发现G的功能这么智能:) G的历史记录问题的idea:可否在commbox右边加上一个memo,凡是在commbox中选中过,或输入后 确定的,都添加到右边的memo中做为历史记录。 4.可以这样:搞个设置选项,钩选“以注册表存放配置信息,或以配置文件存放配置信息“,当以配置文件存放,且系统在W7,且MD放在C盘,启动时弹个消息就行了:) 主要是考虑到,搞Debug的将调试器长久放到C盘的人应该比较少吧。反而是将一个配置好的MD,拷贝到别处临时用的几率高些:) 5."将指令修改分为3中:修改为nop、修改跳转指令、修改其他指令。 " 将这三个放到子菜单中吧,要不影响美感:) 图中4.2问题 您没有注意? 图中1,2的建议我觉得还是很不错的,茫茫码海,有些界限标记很不错的(只是建议不好实现就以后吧:)) 9. 由这个item想到的,在程序中,能不msg的就不要msg了,这样既可以让用户少点几下鼠标,以可以让您少写几行代码:) 一些建议可能并不合理,版主可斟酌无视之 //==================== 新的建议: 10: 命令行窗口可否搞成一个浮动的,因为在调试时,一般更多的时间在是汇编窗口,有些命令想快速执行,如果命令行与汇编窗口在两个标签页上,还要来回切换标签,思路不连贯。 (当前,命令行是借用脚本的窗口吧?),让脚本窗口浮动也可以:) 随写随想,可否将界面布局搞成VS的样式,让“汇编”窗口做为主窗口,“窗口,断点,模块,注释”等等这些窗口都可以做成“停靠”的,然后再学着Delphi的IDE(如下图),这样用户可以遂心如意的定制自己的界面布局了。 11:如图 |
|
[下载]MDebug 1.02 更新
把版主顶进来 |
|
S5代理数据如何回传
楼主,http://bbs.pediy.com/showthread.php?t=128887这个链接里有个Socks5的源,不知对您有没有帮助。 |
|
[下载]MDebug 1.02 更新
哈哈,更新了,下载测试....... 提几个建议供参考:(细节) 1、汇编窗口中,鼠标上下滚动时,可否让高亮行也随着走呀? 2、汇编窗口中,表示当前EIP的那个黄色箭头,当目标程序已经运行后,可否将其隐藏掉,以表示当前非中断状态。 3、汇编窗口中,按G可以跑到指定地址后可以直接高亮。(现在上跳过去后,默认在当前页面的第一行,没有高亮),G窗口中最好能记录跳转地址的历史(或干脆在G窗口中再加上个编辑框,下面的保持现有功能不变,上面的输入地址)。 4、MDebug的配置信息建议从注册表中移到配置文件中去,这样配置文件就可以共享了,方便便携:) 5、见图 6、加载map文件的功能,是否可以加载编译器生成的map文件?(我测试了一下Delphi生成的map文件,好像无法加载,提示map文件不匹配。) 如果只识别IDA的Map文件,建议修改菜单“加载IDA生成的Map文件”:) 7、MD加载一个exe后,Alt+1...5 中的功能5有问题,无法弹出栈窗口,点击工具栏上的图标弹出后,Alt+5又可用了。 7.1、经进一步测试,发现打开MD,载入一个exe后,Alt+5...1,1的功能会出现问题。 8、不知道什么原因,在测试7时,发现“文件-》菜单-》最近的文件”经常保存不了,(处于空白状态)。 9、断点窗口,如果有多个行,按Del删除时,可否删除当前行后,自动选中下一行,而不是提示“没有选中的....." 用的不深,可能有些地方没能体会作者的设计思想,请见谅指正:) |
|
[求助]版主 Mdebug 使用请教:)
谢谢版主回复~! 反复测试了,好像就是断不下来。不知道是不是版本的问题。 我换记事本测试,以避开“确定按钮刚好是关闭对话框功能”这个现象,结果发现以下问题 图中的2,确认按扭点击确定后,MD假死。 重新测试,发现 图中2处对应的子窗口是“汇编”窗口。附加notepad.exe后,直接关闭MDebug,也会导致MDebug假死。 |
|
[求助]版主 Mdebug 使用请教:)
版主: 用您说的第3条 添加 上面的那个 地址后,会在断点管理窗口中出现两个断点. 然后删除,删除, 两次删除后,还会留下一条(这里应该是个Bug), 然后选中没有删除掉的,右键编辑, 就出现这个窗口了. OS xp sp3 这个文件后缀去掉".doc" 论坛好像不能上传log文件 mdbg_err1C76DD.log.doc 另: 我在测试 消息断点时,发现用第一个(上面的那个)地址"对话框的消息处理函数: 0xXXXXXXXXXX " WM_LBUTTONDOWM ,两个参数为空,下断后,;回到被调试程序,点"确定"可以断下来,但调试器无法F5了,(也就是调试器无法继续程序),表现在"调试->执行"可用,但点击无反应. 更多时候,这个消息断点是无法断下来的.试过将近6,7次,只成功断下了一次. 您试试. 用MDebug调试Mdebug的帮助->关于->确定 的消息断点. 加油呀,期待强大稳定的新版 |
|
[求助]MDebug 载入Map文件的方法
版主, 圣诞节有礼物吗? |
操作理由
RANk
{{ user_info.golds == '' ? 0 : user_info.golds }}
雪币
{{ experience }}
课程经验
{{ score }}
学习收益
{{study_duration_fmt}}
学习时长
基本信息
荣誉称号:
{{ honorary_title }}
能力排名:
No.{{ rank_num }}
等 级:
LV{{ rank_lv-100 }}
活跃值:
在线值:
浏览人数:{{ visits }}
最近活跃:{{ last_active_time }}
注册时间:{{ user_info.create_date_jsonfmt }}
勋章
兑换勋章
证书
证书查询 >
能力值