首页
社区
课程
招聘
[求助] Crypkey V7.103,知道sitecode 怎樣求出sitekey.
发表于: 2008-6-6 09:48 73515

[求助] Crypkey V7.103,知道sitecode 怎樣求出sitekey.

2008-6-6 09:48
73515
收藏
免费 0
支持
分享
最新回复 (188)
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
101
i have been following this thread for 10 days now. i read and tried t learn what i can.

finally i had to report problem which i am facing, but before that kudos to all members here who are helping others learn.

i am using a software which is protected by c r y p k e y 6.5. i had valid licence keys also. what all i did is mentioned below

1. i generated user key hash (2) by from the valid site code and key. i tried it in 5 machines (computers) it only worked on one with 2003 server. on xp and other OS it accepts the key but after that gives an error.
2. i tried to find out user key from almost all the exe and dll files which i could relocate to the software but could not find one. i used ollydbg, winhex, PE viewer and ustrref.

Errors that i am getting

1. on one machine it says licence has been moved, cannot run
2. on other machines it gives error which is attached

some of the working codes are

site code: 9717 8713 9FDB 8066 96
SITE KEY : 8852 B0FC E004 7546 46D8 A2F5 82

SITE CODE: E655 B814 6649 4AA8 27
SITE KEY: 5AE9 E5D8 2C2B 0B8B 1E4E 7F39 41

CAN ANYONE TELL ME WHAT WRONG I AM DOING
上传的附件:
2008-11-20 15:26
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
102
according to site codes u give is
crypkey libraries v7.
Company number is 496 -- i think we dealt with this program
somewhere before on this forum; go through and check maybe
user key already been published.
Also the site keys are using level and option bits both =0 which is
quite unusual.
U sure u have checked all dll files in windows/system32 ?
Reinstall program and watch carefully where files go and remeber
names that go to windows/system32.
2008-11-20 19:08
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
103
plz help me, i can't find the userkey & masterkey.

can you find userkey & masterkey in this program?

http://www.mtc-software.com/downloads/design2fab/Design2Fab5_01_06.exe

please help me..
2008-11-20 19:21
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
104
2 things I noticed.
Sitecode says allow easy license but sitekey says no

I think the main point is look at the sitekey your generating the user hash and user seed should be the same.
When you generate the key make sure your getting the right user seed.
That might be your only problem.

Let us know if any of these work.

Mozzie, the company # is only 1 number away from the program I fixed :) That might be what you saw. I almost thought he was
"fixing" the same program :)
2008-11-21 05:14
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
105
Hi Mozzie

the software is a engineering software, which may not be very popular. the user seed is different for all the installations. I have installed it on 10 systems now.

the files which are going to system 32 directory are all related to crypkey.  their is only one  exe file of the program. it is a very small program with one screen only written in .net.

I have installed it on a new system now and the site code which it gives now is

DABE 34A5 545D 1600 DB

my observations when installing the program

1. when i installed the program no files were added inside winnt , system and system32 directory.
2. the program gets installed in the program files.  their is a files to install NT support drivers for crypkey. when this installer is clicked then 3 files are added in system32 and 9 in winnt directory.
3. the main program is a single exe file and one .ckn file.
4. the other files inside the folder are 3931462._req, 3935965._an, ck16rmv.exe, cki32j.dll, cks.exe, crp32001.ngn, crp9516f.dll, cryp95f.dll, hdsn1.dll, setupex.exe (to install nt drivers) and setupex.xco
5. hidden files inside the folder are procalc.41s, procalc.ent, procalc.key, procalc.rst
6. contents inside the hidden files
           procalc.41s : blank
           procalc.ent : D4D277CDE74350
           procalc.key - Do_NOT_DISTURB
           procalc.rst - Do_NOT_DISTURB

this is new installation and i have not tried any key yet.
2008-11-21 13:14
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
106
Can you provide a link to the software?

I used a reference to the program earlier and the user hash seed and user hash were both the same when generating valid keys.
If different I am not sure they would work, that was my point.
2008-11-21 14:30
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
107
thanks a lot all of you. the problem has been solved.

i would specially like to inform new members on the board that spending some time on reading the threads has helped me a lot and i was able to crack the security.

help is always their but we need to understand ourselves first.

i would specially like to thank Dr. Pete, mozzie and very very special thanks to yinhuo whose post helped me a lot.

thanks everyone. i would certainly like to help whatever i can
2008-11-22 13:02
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
108
well glad to hear you had success.
I had a couple of quick looks at it
and realised it is crypkey stealth.
I not familar with this one.

So how did u do it in the end?
2008-11-22 18:59
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
109
someone please generate new sitekey for my sitecode still trying to work out this gemvixxx6
5426 9284 4BB6 8EEB 55
2008-11-26 23:52
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
110
thanks yinhuo mozzie and watanabe i am now injoying  the mxxxxx6 program
learned how to use the ckinfo

now i want to learn the crpkey skg7103
2008-12-12 08:24
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
111
I give up...  
I been trying understand and learn how to crack CrypKey copy protection but apparently I need more patients and nerves!!!
If someone can help me with my Matrix60 site code I will be very appreciated – please and thank you !
Here is the SiteCode= 4442 777F 2EE0 5FAC C5
2008-12-14 20:40
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
112
[QUOTE=;]...[/QUOTE]
Hi,

I also have software based on CrypKey. I also use CKINFO v1.12 to get information about my SiteCode and result as below:

C:\TEMP>ckinfo /siteCode D2F9 D498 A999 BCB3 BA
CrypKey Copy Protection Information v1.12
(C)2001-2005 thewd, thewd@hotmail.com

Parsing Code - D2F9 D498 A999 BCB3 BA
Decrypting Code - 047B 343C 0862 169E A8
Code Validation - OK
Formatting Code :
7B 34 3C08 6216 9EA8
╚╣ ╚╣ ╠══╝ ╠══╝ ╠══╝
Site Code Id - 0x7B ═══════╣ ║ ║ ║ ╚═══════════════ Code CRC - 0x9EA8
Allow Add Licence? - No ═══╝ ║ ║ ╠════════ User Key Hash (Seed) - 0x1662
Allow Easy Licence? - No ═════╣ ║ ╚═════════ Drive Serial Number - unused
CrypKey Libraries - v5.2 ═════╝ ╠═ Account Number - 60
╠═ Application Id - 2
╚═ Company Number - 795660


Now what I need to do to get SiteKey for my application?

thx.
2008-12-15 07:05
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
113
still no luuuck with my SiteKey ....  

why why why i'm still geting "Error Updating Key"

PLEASE mozzie help me PLEASE !!!

If some one still willing spare my nerves please help
here is the Site Code : F28B 45E7 EDDD 9EA5 F3
2008-12-16 23:32
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
114
Bimba, please tell us what your doing.
Do you use ckinfo to get sitekey?

I used your sitecode to get the start of information then just apply ckinfo
to get a good site key.

Where did you get the site code from?

HELP us to help you with more information about what you have done.
2008-12-17 01:04
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
115
DrPete

All is about the GV Matrix 6

Here are my steps so far:
1.        Install GV Matrix 6
2.        Downloaded CKInfo.rar (crp32dll.dll, crp32002.ngn, GVMATRIX.ckn, GVMATRIX.lic, StudentKeyCreator.exe)
3.        Copy all these files and replace  in C:\Program Files\Matrix60
4.        Downloaded ckInfo.exe(v.1.0.9.0) + ckinfo-scripts
5.        Run ckInfo.exe, use CrypKey Site Key Generator.ckInfo
6.        Run StudentKeyCreator.exe
7.        Copy Site Code from StudentKeyCreator, paste to the 5.
8.        Generate Key
9.        Use the key
10.        Result - "Error Updating Key"

Here is result from CrypKey Site Key Generator:
CrypKey Copy Protection Information v1.09
Executing Script File (CrypKey Site Key Generator)

Key Information...
+ Site Code                 : F28B 45E7 EDDD 9EA5 F3
+ User Key                  : DAA7 6B07 0237 5AF5 24
+ Easy Licence?          : No
+ Number Of Licences : 1
+ Network Licence?     : No
+ Licence Duration      : Unlimited
+ Key Level                 : 0
+ Key Options             : 1,14

Key Validation - OK
Creating Key   - 0000 01BB 0000 0004 8000 0041 6B
Encrypting Key - CC13 5E8C A5A0 B522 FC4D CC12 AB

Please do remember that i am rookie in this so im still learning.
2008-12-17 02:39
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
116
Hi Bimba,
First off, are you trying to find key for Matrix 6 or student key creator?
Both are in the threads here :)
For Matrix I think your trying for licence duration unlimited should be days and then try for 30 days.
That gets you started.
You have different steps mixed for different programs here.
Use ckinfo and the script function only, it's easier and will get you good key.
2008-12-17 02:57
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
117
DrPete... thank you for the help !

I need only Matrix 6. Can you help me out with ckinfo here?
By using ckinfo i get all info, but in or by what file (name) i have to save it? Because i was trying before use ckinfo and save as liscad.ckInfo but the result was "Error Updating Key"
Here is the liscad.ckInfo detailes:
#Default Script (ckInfo)
ScriptName=Liscad v7, v8
Action=CreateSiteKey
SiteCode=F28B 45E7 EDDD 9EA5 F3
UserKey=DAA7 6B07 0237 5AF5 24
AddToExistingLicence=no
EasyLicence=no
NumberOfLicences=1
NetworkLicence=yes
LicenceDuration=days
NumberOfDays=30
KeyLevel=999
KeyOptions=1
2008-12-17 03:19
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
118
You save the .key file ckinfo generates.
The .key file is hidden file on your computer.
Make sure you back the original .key file.
Also, no spaces the file length is 26 byte long.

If you look back in the thread in the forum Matrix has been fixed.
I assume this is where you got the site code from?
All the information is there, just re read the threads. :)
2008-12-17 03:56
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
119
Thank you  DrPete
i will try that and later will poste the results
2008-12-17 04:05
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
120
DrPete
i dont want be rude, but where you find this .key file? I made all my files and folders visable, but still can't find it. I been trying in Matrix60, Windows folders still no luck - any help(folder) please!
thank you for helping me ...
2008-12-17 05:43
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
121
Sometimes under documents & settings for your user name.

Make sure you show hidden & system files.
2008-12-17 06:11
0
雪    币: 201
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
122
DrPete i appreciate for your advice, but  i spend all day scanning my pc for this .key file  still can’t find it....
it’s becoming very frustrating because i spend so much time on this but still have no descent result. Any help or advice PLEASE
2008-12-18 03:21
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
123
Make sure you have system files showing.
C drive
Tools tab
Folder options
View tab
Show hidden files and folders
Hide protected operating system files is unchecked
Apply

Don't use windows scan, you should find this .key file by hand very easy

Is there a place I can d/l your program other than a torrent?
2008-12-18 04:24
0
雪    币: 200
活跃值: (10)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
124
My issue is still not solved, software still can not be passed registration correctly. I've tried to edit some points like you suggested. What is wrong?

Do you need me to upload software to analyse?
2008-12-18 15:00
0
雪    币: 206
活跃值: (11)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
125
If you can u/l somewhere I can take a look for you.
What have you tried so far?
Is the software doing an online registration check?
What is the name?
2008-12-18 15:16
0
游客
登录 | 注册 方可回帖
返回
//