A very good program for analyze anything that goes on inside your computer.

It's very good for firmware hackers!

       _ _____  ______\    _____     _ _____
        ._/ \\___/._\      \ _/  __/__._/ \\___/
        |    __/__|  \__    \   \\    \    __/___.     Living on the EDGE
        |  _/     :    /    /   _/    /  _/      |
<-------|__\_______________/|________/|__\_______|----------------------------->

        RELEASE NAME ..... busTRACE v6.0
        SUPPLIER ......... Team EDGE
        CRACKER .......... Team EDGE
        PROTECTION ....... Custom Dongle
        RELEASE DATE ..... 15/10/2007
        SIZE ............. 5 x 5MB
        URL .............. http://www.bustrace.com/

<------------------------------------------------------------------------------>

  PRODUCT DESCRIPTION

                                busTRACE v6.0

   Hey hey hey kids, Team EDGE is back once again!

   We simply love this program enough that we coded both a dongle
   creator program for guys who have a SanDisk Micro Cruzer USB Flash
   stick ($5 online) and we did a nice little dongle emulator driver
   for those of you who prefer this method.

   So people enjoy this awesome program, we sure do.

   busTRACE 6.0 is a comprehensive bus and device analysis tool in use
   by leading system OEMs, peripheral OEMs, software developers, USB
   developers, and storage developers all over the world.

   busTRACE 6.0 provides a suite of applications designed to help you
   perform advanced bus and device analysis.

   Capture I/O activity on your computer or any computer, busTRACE 6.0
   includes the ability to capture and analyze storage class I/O
   activity within your Windows PC.

   Under Windows 2000 (and above), busTRACE also allows you to capture
   and analyze all low-level USB bus activity.

   Bus Architectures Supported:

   busTRACE 6.0 can capture and analyze storage device I/O activity
   (e.g. hard drives, tape drives, CD/DVD/HD/BD drives, jukeboxes,
   etc.) on a variety of bus architectures including:

    - IDE/ATA/ATAPI   - Serial ATA           - Serial ATAPI
    - SCSI            - iSCSI                - Serial Attached SCSI
    - Fibre Channel   - RAID                 - USB 1.0 or 2.0
    - 1394 / Firewire - Multipath I/O (MPIO) - and more!

<------------------------------------------------------------------------------>

  INSTALLATION INSTRUCTIONS

   1. Unzip and Unrar.

   2a. If you have a SanDisk Cruzer Micro 128MB to 2GB USB Flash Stick
       we have included a tool that you can make your own dongle with!

       Plug in your Flash Stick and run: \EDGE\create\create.exe
       to make your very own dongle. 

       If you did this step then you dont need the ones listed below
       since you are the lucky owner of a fully feature dongle now.

   2b. If you dont have a SanDisk Cruzer Micro stick we supply a nice
       dongle emulator, here is how to install it:

       Start the Control Panel and select Add Hardware and follow
       the wizard. Below are the steps under XP:

       * Have you already connected the hardware to your computer?
         [Yes]

       * From the list below, select an installed hardware device...
         [scroll down and select "Add a new hardware device"]

       * What do you want the wizard to do?
         [Install the hardware that I manually select from a list]

       * If you do not see the hardware category you want, click
         Show All Devices.
         [Show All Devices]

       * Select the manufacturer and model...
         [Press the "Have Disk" button]

       * Copy manufacturer's files from:
         [Navigate to the EDGE\Emu directory]

       Windows 2000 only: if you are prompted to assign resources,
       select cancel and installation will complete.

   3. Run BusTrace_Setup6_0_025.exe and complete the installer,
      dont run the program yet.

   4. Run BusTrace_6_0_035_up(DataCode-20070306).exe to upgrade
      to v6.0.035, dont run the program yet.

   5. Copy inject.exe from the EDGE dir to where you installed into
      e.g.: c:\Program Files\busTRACE 6.0\

      And run it, thats all, emulator should be installed and
      injected. You can now enjoy this awesome software.

   6. Enjoy!

   PS. Do NOT upgrade/check for updates thought the internet.

<------------------------------------------------------------------------------>

  WE ARE DEDICATED TO QUALITY, NOT QUANTITY, AND WE ARE DOING IT FOR THE LULZ!

<------------------------------------------------------------------------------>

Download from one of:

http://www.megaupload.com/?d=7263FBH8
http://www.mediafire.com/?dihyy1n1cio
http://rapidshare.com/files/62660574/BusTRACE.v6.0-EDGE.rar.html
http://www.filesend.net/download.php?f=86990a96a450e5e0b5f17db224bb9a69
http://files-upload.com/files/563107/BusTRACE.v6.0-EDGE.rar

[培训]内核驱动高级班，冲击BAT一流互联网大厂工作，每周日13:00-18:00直播授课