[分享][讨论]流程图-社区版务-看雪安全社区｜专业技术交流与安全研究论坛

[分享][讨论]流程图

发表于: 6天前 184

[分享][讨论]流程图

kanxue

6天前

184

$ f'(x) = \lim \limits _{\Delta x \rightarrow 0} \frac {f(x + \Delta x) - f(x)} {\Delta x} $

$
f(x) = \begin {cases}
x, & \text {if } x \ge 0 \\
-x, & \text {if } x < 0
\end {cases}
$

```mermaid
flowchart LR
    A[Hard] -->|Text| B(Round)
    B --> C{Decision}
    C -->|One| D[Result 1]
    C -->|Two| E[Result 2]
```

```mermaid
requirementDiagram

requirement rider_safety {
        id: 1
        text: Riders must be able to stop safely in all conditions.
        risk: high
        verifymethod: test
    }

functionalRequirement brake_response {
        id: 1.1
        text: Brakes engage within 100 ms of lever pull.
        risk: medium
        verifymethod: test
    }

performanceRequirement stopping_distance {
        id: 1.2
        text: Stop from 25 km/h within 4 m on dry pavement.
        risk: medium
        verifymethod: demonstration
    }

designConstraint water_resistance {
        id: 1.3
        text: Brake electronics must be IP67 rated.
        risk: low
        verifymethod: inspection
    }

element brake_controller {
        type: hardware
        docRef: "specs/brake-controller"
    }

element road_test_suite {
        type: "test suite"
        docRef: "qa/road-tests"
    }

rider_safety - contains -> brake_response
    rider_safety - contains -> stopping_distance
    brake_response - derives -> water_resistance
    brake_controller - satisfies -> brake_response
    road_test_suite - verifies -> stopping_distance
```

冰与火的战歌：Windows内核攻防实战高级班！从零到实战，融合AI与Windows内核攻防全技术栈，打造具备自动化能力的内核开发高手。

最后于 6天前被kanxue编辑，原因：

收藏・0

点赞・0

打赏