|
一段内存数据,电脑是如何知道其结构的?
电脑不会知道这是啥玩意,能访问到这里的,肯定是你的代码啦. 比如你写个程序: int dw1 = 0x11223344; int main() { return dw1; } 假设.text在0x00401000,.data段在0x402000不被优化的话,汇编代码一般是: mov eax, dword ptr [0x00402000] //dw1的地址 retn 懂了? 电脑不会知道那是什么结构,要看它是怎么访问的. |
|
|
|
[原创][2014-12-11更新]程序员记忆录!.
吃得苦中苦,方为人上人.向lz致敬~ |
|
[原创]inline hook 入门教程
vc编译器可以使用/hotpatch和/functionpadmin选项生成带热补丁的函数头,即5个nop(x86)在函数入口前,一个mov edi,edi在入口处~ |
|
[求助]求大牛解惑DLL的问题
我记得导入序号好像不是必须的,只有在导入名称不存在时有用. |
|
[原创]路由器另类玩法之提取根文件系统映像并解包
好像是个专业论坛 |
|
[原创]路由器另类玩法之提取根文件系统映像并解包
原来如此估计5位数里逆向得占大头吧 |
|
[原创]路由器另类玩法之提取根文件系统映像并解包
很赞同,的确是得精通了才行~ |
|
[原创]路由器另类玩法之提取根文件系统映像并解包
不是吧,这也能赚钱0.0技术应该共享出来才能进步啊~虽然不适用于所有人~ |
|
[原创]手工给无线路由器焊接TTL,拿shell
不是很清楚,昨晚调整wifi天线到4点多,还是不见好,但是感觉就是天线的问题,将万用表的笔接在一个触点上,信号就会变强一点. |
|
|
|
[原创]手工给无线路由器焊接TTL,拿shell
不一定,一般都有吧 |
|
[原创]手工给无线路由器焊接TTL,拿shell
看的网上某些大牛说的,非原创,链接: http://bbs.lcdhome.net/read-htm-tid-16729.html http://bbs.lcdhome.net/read-htm-tid-20518.html http://bbs.asiatvro.com/thread-159955-1-1.html 一般电路板上面积较大的金属区域就是gnd,我这板子上有好几个已标出的gnd. 先根据电阻测出gnd:万用表黑笔放在已知gnd上,然后红笔挨个测试4个触点的电阻,接近0的就是ttl的gnd端. 然后再测电压:黑笔gnd,红笔挨个测量,一般txd和rxd的电压在3.3V上下,并且一般情况下txd和rxd是紧挨着的,根据网上大牛所说,因为txd会发送数据,所以txd比rxd电压略高一点. vcc说是一般是5V左右,我这里vcc是也是3.3v.但是比较好区分,vcc在电路板上的焊点是方形的,其他gnd,txd,rxd都是圆形的. 最后连接usb2ttl时,只接gnd,txd,rxd.不接vcc.听说接了vcc可能会烧坏板子. 在抛出我路由器的硬件信息: # cat /proc/cpuinfo # cat /proc/version 还找到了传输文件的方法,我这路由器支持usb.把读卡器格成fat或fat32.挂接到嵌入式linux里. 用cp命令可以copy文件. |
|
[讨论]如何非常规获取模块加载的通知
硬断需要对所有线程设置,并且还可能被检测. |
|
|
操作理由
RANk
{{ user_info.golds == '' ? 0 : user_info.golds }}
雪币
{{ experience }}
课程经验
{{ score }}
学习收益
{{study_duration_fmt}}
学习时长
基本信息
荣誉称号:
{{ honorary_title }}
能力排名:
No.{{ rank_num }}
等 级:
LV{{ rank_lv-100 }}
活跃值:
在线值:
浏览人数:{{ visits }}
最近活跃:{{ last_active_time }}
注册时间:{{ user_info.create_date_jsonfmt }}
勋章
兑换勋章
证书
证书查询 >
能力值