|
|
|
|
|
|
|
12月7日升级――OllyMachine v0.20最终版
既然增加自定义变量很困难 是否可以增加一个typedef呢? :) 譬如typedef reg00 pStr 以后代码里使用pStr即可 做一个影射表,应该不会困难吧 |
|
12月7日升级――OllyMachine v0.20最终版
最初由 tane 发布 看着别扭,改了一下:) invoke FindOpcode, eip, 0x61 invoke Go, reg00 invoke stepovers,2 invoke InputText, "Please input filename for dump" invoke DumpAsPE, FreeBufferReg, eip |
|
|
|
OllyMachine问答与技巧集
4.5.9 InputHexLong 把用户输入的数值储存在reg00中。 如果用户按了CANCEL,则reg00的值为value原来的值。 这样的设计不好吧,如果输入值和原来reg00里的值相同,则应该如何判断是否输入数据? |
|
修正版OllyPad
最初由 getiteasy 发布 有可能是其他插件的问题咯~ 譬如那个point-h的插件也有这个bug~ 这样也会影响到其他插件的正常使用 |
|
在写一个小垃圾程序,遇到了问题,请各位C高手指点。
先去查一下sscanf怎么用吧,我上面写了个例子,可是好像你根本没看懂 |
|
在写一个小垃圾程序,遇到了问题,请各位C高手指点。
qq就算了吧 UINT不是WORD,WORD长度为2byte, UINT = DWORD = 4byte, 所以要用 LOWORD操作符来取低位WORD 如果要限制用户输入,只能监视用户输入的是啥,不是0~F的忽略掉 sscanf里用"%X"是按16禁止转换 10进制的用"%d" |
|
在写一个小垃圾程序,遇到了问题,请各位C高手指点。
先用GetDlgItemText或得字符串(,譬如结果为str = "FFFF") 然后用sscanf转换为DWORD ( 或者说是unsigned int) sscanf( str, "%X", &result); 然后用LOWORD( result)取低位 l_re = LOWORD( result); 估计应该就ok了 |
|
GODUP - Godfather+ Olly Debugger Universal Plug-in
最初由 fly 发布 呵呵,exetools上还有对我的点名批评哪,郁闷 不过还好偶得id可以下东西 |
|
修正版OllyPad
最初由 getiteasy 发布 我修正的这个难道还有这个问题? |
操作理由
RANk
{{ user_info.golds == '' ? 0 : user_info.golds }}
雪币
{{ experience }}
课程经验
{{ score }}
学习收益
{{study_duration_fmt}}
学习时长
基本信息
荣誉称号:
{{ honorary_title }}
能力排名:
No.{{ rank_num }}
等 级:
LV{{ rank_lv-100 }}
活跃值:
在线值:
浏览人数:{{ visits }}
最近活跃:{{ last_active_time }}
注册时间:{{ user_info.create_date_jsonfmt }}
勋章
兑换勋章
证书
证书查询 >
能力值