I have get all the relationshipes of Mastercam's HASP.The HASP ID,The Serial,The user type,The Start Day,The End Day,and others...Below is one of the DUMP:The End Day is 2008.03.01.And the user type is Industrial.
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Emulator\HASP\Dump\584B4AE9]
"Name"="Mastercam-MR0304-xp"
"Copyright"="ckearth"
"Created"="ckearth"
"SN"=dword:3A4354F0
"Type"=dword:00000001
"Memory"=dword:00000001
"SecTable"=hex:2D,2D,03,03,ED,ED,C3,C3
"NetMemory"=hex:03,00,70,00,02,FF,00,00,FF,FF,FF,FF
"Option"=hex:01,01,00,4A,1F,00,0C,03,68,00,61,00,72
"Data"=hex:B7,37,BC,C5,0F,AB,00,00,00,00,1A,EB,47,01,06,00,\
47,01,00,00,47,01,02,00,47,01,06,09,47,01,00,00,\
82,30,73,36,61,44,DF,41,0D,0C,00,00,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
Now I can do it (for Mastercamv9x) in the state of no HardwearHASP
Very Thanks for you share!
