(c) 2006-2007 www.dongle.ru
Installation Instructions
=======================
1. Delivery
2. Installing a new set of
3. Restoring the kit
4. Removal of the
5. Viewing emulator
Please note!
I. If we have to read instructions, read to the end.
II. All of the actions described below, need to do in the system with Administrator privileges.
III. This vercia emulator v2.01-tested and is good with the last (at the time) version of the drivers Sentinel 7.1.1 and more earlier versions.
IV. Key proamulirovan 1:1, in conformity with dampom
1. Delivery ===========
The package : Emu \! Readme.txt file with installation instructions.
instnt-new.bat--\\ is a program to establishing a new emulator to a clean system.
instnt-upd.bat ---\\ is a program to restore a crooked emulator in the system, where it was already installed earlier.
delnt.bat ---\\is a program emulator pulling from the system.
wdreg.exe-----\\Installation / removal of the devices. licence.reg-image memory key
unreg.reg ---\\to delete image memory key from the registry.
sentemu.sys---\\file driver emulator
2. Setting up new installation
=============================
Emulator works with only original dongle drivers.
You must install original dongle drivers (take it from http://www.rainbow.com)
and have administrator privileges at your system for installing the emulator.
1. Close all copies of your application which you can run under emulator
2. Run instnt-new.bat.
Agree with acknowledgement to enter data into registry.
It looks like that:
\Emu> instnt-new.bat
The platform is Winnt
The major version is 5
The minor version is 0
Stopping driver entry... Failed <-- Status OK or Failed doesnt mean error
Deleting driver entry... Failed <-- Status OK or Failed doesnt mean error
1 file(s) copied.
1 file(s) copied.
Press any key to continue . . . <-- Press any key
The platform is Winnt
The major version is 5
The minor version is 1
Creating driver entry... OK <-- Here must be OK
Starting driver... OK <-- And here
Press any key to continue . . . <-- Press any key
After that emulator will start after starting up your system
sometimes you need to reinstall dongle emulator. You can make it by
running instnt-upd.bat
1. instnt-upd.bat
\Emu> instnt-upd.bat
The platform is Winnt
The major version is 5
The minor version is 1
Stopping driver entry... Failed <-- Status OK or Failed doesnt mean error
Deleting driver entry... Failed <-- Status OK or Failed doesnt mean error
1 file(s) copied.
1 file(s) copied.
Press any key to continue . . . <-- Press any key
The platform is Winnt
The major version is 5
The minor version is 1
Creating driver entry... OK <-- Here must be OK
Starting driver... OK <-- And here
Press any key to continue . . . <-- Press any key
2. Reboot
If it doesnt solve your problem, remove emulator from system by running
delnt.bat and reinstall emulator (see chapter 1)
1. Run delnt.bat
Agree with acknowledgement to enter data into registry.
\Emu> delnt.bat
The platform is Winnt
The major version is 5
The minor version is 1
Creating driver entry... OK <-- Here must be OK
Starting driver... OK <-- And here
Press any key to continue . . . <-- Press any key
2. Reboot computer
5. Viewing emulator =======================================
To verify efficiency emulator run GetID if emulator works the GetID extradite two hexadecimal numbers.
SentEmu.SYS (V E R S I O N _ I N F O )
Sentinel.Flt dongle emulator for WindowsNT/2000/XP/2003(c)1998-2007 by MeteO
Build date:(02-09-07 04:40:54)
Build ver.:2.21.003.0 (DEBUG)(ONLY TABLE_EMULATION)(WP_REQ)
Contact with us: meteo@null.net, http://www.dongle.ru
