如果对glibc内存管理的逻辑比较了解，在学习各种堆漏洞利用的方法时，就会更顺畅一些，而且glibc内存管理的代码，本身也很值得看一看，好几次决定写点总结，都是咬咬牙又放弃了，现在，我觉得已经不能再拖了。
在刚入门C语言编程时就知道：为了使用一块堆内存，要先分配。随着接触编程一段时间后，慢慢开始意识到：分配，就是底层代码把正在使用的内存区域记录下来，从而保证程序始终知道哪些空间是正在使用的，哪些空间当前是空闲的，进一步保证每次获取的内存，不会与正在使用的内存重叠。
刚才已经说了，CPU的权限是支持调节的，最高权限时，可以执行所有指令，包括将权限调低，但低权限向高权限调节，就需要接受额外的条件(否则权限如果可以随意调高，那么权限设计的意义就没了)，那就是必须穿过“门”进行提升，而在穿过“门”的同时，也要求执行一次代码跳转(这种要求，以及“门”的设计，也是硬件层实现的)，而内核代码是在CPU刚上电时就开始执行了，相比用户程序，内核具有设置这个跳转地址的先机，所以当然会将其设置为内核代码的地址。这样，内核代码就总能在最高权限执行，而用户代码总是在低权限执行，同时又有路径从用户态(低CPU权限下执行用户代码的状态)回到内核态(最高CPU权限下执行内核代码的状态)。很多特权指令，只在CPU高权限状态时有效，比如CR3寄存器的读/写指令，从而“强制”用户程序使用内核接口，对进程本身的虚拟空间和占用的物理内存，进行管理。
这块内容是参考《Glibc内存管理--Ptmalloc2源代码分析.pdf》学习的，这份pdf文件总共129页，分析过程非常详细、深刻，为了防止遗忘，我整理了一个主要过程出来，并且为有些部分添加了配图和个人的理解。
《Glibc内存管理--ptmalloc2源代码分析》博客系列：https://www.iteye.com/blog/user/mqzhuang
// 32位系统
*(char *)0x9d08008 = 0;
// 32位系统
*(char *)0x9d08008 = 0;
jmpcall@ubuntu:test$ ./a.out
Segmentation fault
jmpcall@ubuntu:test$ ./a.out
Segmentation fault
int main()
{
80483c3: 55 push %ebp
80483c4: 89 e5 mov %esp,%ebp
*(char *)0x9d08008 = 0;
80483c6: b8 08 80 d0 09 mov $0x9d08008,%eax
80483cb: c6 00 00 movb $0x0,(%eax)
return 0;
80483ce: b8 00 00 00 00 mov $0x0,%eax
}
int main()
{
80483c3: 55 push %ebp
80483c4: 89 e5 mov %esp,%ebp
*(char *)0x9d08008 = 0;
80483c6: b8 08 80 d0 09 mov $0x9d08008,%eax
80483cb: c6 00 00 movb $0x0,(%eax)
return 0;
80483ce: b8 00 00 00 00 mov $0x0,%eax
}
struct malloc_state {
/* Serialize access. */
mutex_t mutex;
/* Flags (formerly in max_fast). */
int flags;
/* Statistics for locking. Only used if THREAD_STATS is defined. */
long stat_lock_direct, stat_lock_loop, stat_lock_wait;
/* Fastbins */
mfastbinptr fastbinsY[NFASTBINS];
/* Base of the topmost chunk -- not otherwise kept in a bin */
mchunkptr top;
/* The remainder from the most recent split of a small request */
mchunkptr last_remainder;
/* Normal bins packed as described above */
mchunkptr bins[NBINS * 2 - 2];
/* Bitmap of bins */
unsigned int binmap[BINMAPSIZE];
/* Linked list */
struct malloc_state *next;
/* Linked list for free arenas. */
struct malloc_state *next_free;
/* Memory allocated from the system in this arena. */
INTERNAL_SIZE_T system_mem;
INTERNAL_SIZE_T max_system_mem;
};
struct malloc_state {
/* Serialize access. */
mutex_t mutex;
/* Flags (formerly in max_fast). */
int flags;
/* Statistics for locking. Only used if THREAD_STATS is defined. */
long stat_lock_direct, stat_lock_loop, stat_lock_wait;
/* Fastbins */
mfastbinptr fastbinsY[NFASTBINS];
/* Base of the topmost chunk -- not otherwise kept in a bin */
mchunkptr top;
/* The remainder from the most recent split of a small request */
mchunkptr last_remainder;
/* Normal bins packed as described above */
mchunkptr bins[NBINS * 2 - 2];
/* Bitmap of bins */
unsigned int binmap[BINMAPSIZE];
/* Linked list */
struct malloc_state *next;
/* Linked list for free arenas. */
struct malloc_state *next_free;
/* Memory allocated from the system in this arena. */
INTERNAL_SIZE_T system_mem;
INTERNAL_SIZE_T max_system_mem;
};
typedef struct _heap_info {
mstate ar_ptr; /* Arena for this heap. */
struct _heap_info *prev; /* Previous heap. */
size_t size; /* Current size in bytes. */
size_t mprotect_size; /* Size in bytes that has been mprotected
PROT_READ|PROT_WRITE. */
/* Make sure the following data is properly aligned, particularly
that sizeof (heap_info) + 2 * SIZE_SZ is a multiple of
MALLOC_ALIGNMENT. */
char pad[-6 * SIZE_SZ & MALLOC_ALIGN_MASK];
} heap_info;
typedef struct _heap_info {
mstate ar_ptr; /* Arena for this heap. */
struct _heap_info *prev; /* Previous heap. */
size_t size; /* Current size in bytes. */
size_t mprotect_size; /* Size in bytes that has been mprotected
PROT_READ|PROT_WRITE. */
/* Make sure the following data is properly aligned, particularly
that sizeof (heap_info) + 2 * SIZE_SZ is a multiple of
MALLOC_ALIGNMENT. */
char pad[-6 * SIZE_SZ & MALLOC_ALIGN_MASK];
} heap_info;
struct malloc_chunk {
INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */
INTERNAL_SIZE_T size; /* Size in bytes, including overhead. */
struct malloc_chunk* fd; /* double links -- used only if free. */
struct malloc_chunk* bk;
/* Only used for large blocks: pointer to next larger size. */
struct malloc_chunk* fd_nextsize; /* double links -- used only if free. */
struct malloc_chunk* bk_nextsize;
};
struct malloc_chunk {
INTERNAL_SIZE_T prev_size; /* Size of previous chunk (if free). */
INTERNAL_SIZE_T size; /* Size in bytes, including overhead. */
struct malloc_chunk* fd; /* double links -- used only if free. */
struct malloc_chunk* bk;
/* Only used for large blocks: pointer to next larger size. */
struct malloc_chunk* fd_nextsize; /* double links -- used only if free. */
struct malloc_chunk* bk_nextsize;
};
(((((unsigned long)(sz)) >> 6) <= 38)? 56 + (((unsigned long)(sz)) >> 6): \
((((unsigned long)(sz)) >> 9) <= 20)? 91 + (((unsigned long)(sz)) >> 9): \
((((unsigned long)(sz)) >> 12) <= 10)? 110 + (((unsigned long)(sz)) >> 12): \
((((unsigned long)(sz)) >> 15) <= 4)? 119 + (((unsigned long)(sz)) >> 15): \
((((unsigned long)(sz)) >> 18) <= 2)? 124 + (((unsigned long)(sz)) >> 18): \
126)
(((((unsigned long)(sz)) >> 6) <= 38)? 56 + (((unsigned long)(sz)) >> 6): \
((((unsigned long)(sz)) >> 9) <= 20)? 91 + (((unsigned long)(sz)) >> 9): \
((((unsigned long)(sz)) >> 12) <= 10)? 110 + (((unsigned long)(sz)) >> 12): \
((((unsigned long)(sz)) >> 15) <= 4)? 119 + (((unsigned long)(sz)) >> 15): \
((((unsigned long)(sz)) >> 18) <= 2)? 124 + (((unsigned long)(sz)) >> 18): \
126)
|
1
2
|
// 32位系统
*(char *)0x9d08008 = 0;
|
[培训]内核驱动高级班，冲击BAT一流互联网大厂工作，每周日13:00-18:00直播授课
pukrquq
