SoftICE的基本配置如下:(在Win2000中)
1）打开Symbol Loader显示：
“SoftICE is not active. Symbols cannot be loaded.”
2）打开Symbol Loader→Edit→SoftICE Initialization Setings....显示：
   1.general项为:
  “CODE ON; FAULTS OFF; I3HERE OFF; WD 4; WC 18;WF;  SET FONT 2; X;”
   2.Symbols项为空
   3.Exports项为:
advapi32.dll, comctl32.dll, comdlg32.dll, gdi32.dll, kernel32.dll, msvbvm(50/60).dll, msvcrt.dll, ole32.dll, oleaut32.dll, shell32.dll, user32.dll, version.dll
   4.其他项未做改动,均为default设置

可是,当我启动SoftICE来调试软件时,试着下如下断点:
1.用 bpx hmemcpy 时,出现错误提示:
“Symbol Not Defined (hmemcpy)”

2.用 bpx GetDlgItemText  时,出现错误提示:
“Symbol Not Defined (GetDlgItemText)”

3.再用以下断点,亦出现类似的错误提示:
bpx GetDlgItemTextA
bpx GetDlgItemTextW
bpx   DialogBox
bpx lockmytask

Symbol Not Defined (XXXX)

请问各位高人,小弟改如何处理,望各位不吝赐教.

[注意]传递专业知识、拓宽行业人脉——看雪讲师团队等你加入！