首页
社区
课程
招聘
[转帖]Command Bar 3.20.110 by Gigapede
发表于: 2012-10-21 23:32 6504

[转帖]Command Bar 3.20.110 by Gigapede

2012-10-21 23:32
6504
Command Bar 3.20.110 by Gigapede
Gigapede's Command Bar 3.20.110 ported to OllyDbg 2.01g...
t_command cmdlist[] = {
// "Assignment" command, must be first in the list.
{ _T("SET"), _T("LV"), 0, Setcmnd, _T("Writes value of expression to reg|mem") }, // Assign to lvalue
// Disassembler commands.
{ _T("AT"), _T("A"), 0, Dasmcmd, _T("Disassemble at address") }, // Disassemble at address
{ _T("FOLLOW"),_T("A"), 0, Dasmcmd, _T("Disassemble at address") }, // Ditto
{ _T("ORIG"), _T(""), 0, Dorigin, _T("Disassemble at EIP") }, // Disassemble at EIP
{ _T("*"), _T(""), 0, Dorigin, _T("Disassemble at EIP") }, // Ditto
// Dump and stack commands.
{ _T("D"), _T("A"), 0, Dumpcmd, _T("Dump at address") }, // Dump at address
{ _T("DUMP"), _T("A"), 0, Dumpcmd, _T("Dump at address") }, // Dump at address
{ _T("DA"), _T("a"), DU_DISASM|0x0011, Dumpcmd, _T("Dump as disassembly") }, // Dump as disassembly
{ _T("DB"), _T("a"), DU_HEXTEXT|0x0101, Dumpcmd, _T("Dump in hex byte format") }, // Dump in hex byte format
{ _T("DC"), _T("a"), DU_TEXT|0x0401, Dumpcmd, _T("Dump in ASCII format") }, // Dump in ASCII format
{ _T("DD"), _T("a"), DU_ADDR|0x0014, Dumpcmd, _T("Dump in stack format") }, // Dump in stack format
{ _T("DU"), _T("a"), DU_UNICODE|0x0402, Dumpcmd, _T("Dump in UNICODE format") }, // Dump in UNICODE format
{ _T("DW"), _T("a"), DU_IHEX|0x0082, Dumpcmd, _T("Dump in hex word format") }, // Dump in hex word format
{ _T("STK"), _T("A"), 0, Stakcmd, _T("Go to address in stack") }, // Go to address in stack
// Assembling commands.
{ _T("A"), _T("AS"), 0, Assembl, _T("Assemble at address") }, // Assemble at address
// Comments and labels.
{ _T("L"), _T("AS"), NM_LABEL, Commlab, _T("Label at address") }, // Label at address
{ _T(":"), _T("AS"), NM_LABEL, Commlab, _T("Label at address") }, // Ditto
{ _T("C"), _T("AS"), NM_COMMENT, Commlab, _T("Comment at address") }, // Comment at address
// Breakpoint commands.
{ _T("BP"), _T("AS"), 0, Breakpt, _T("Break with condition") }, // Break with condition
{ _T("BPX"), _T("S"), 0, Brkname, _T("Break on all calls") }, // Break on all calls
{ _T("BPD"), _T("S"), 1, Brkname, _T("Delete break on all calls") }, // Delete break on all calls
{ _T("BC"), _T("A"), 0, Delbkpt, _T("Delete breakpoint") }, // Delete breakpoint
{ _T("ME"), _T("Av"), MEMBP_EXETURE, Membkpt, _T("Memory breakpt on execute") }, // Memory breakpt on execute
{ _T("MR"), _T("Av"), MEMBP_READ, Membkpt, _T("Memory breakpt on access") }, // Memory breakpt on access
{ _T("MW"), _T("Av"), MEMBP_WRITE, Membkpt, _T("Memory breakpt on write") }, // Memory breakpt on write
{ _T("MERW"), _T("Av"), MEMBP_ERWALL, Membkpt, _T("Memory breakpt on E.R.W") }, // Memory breakpt on E.R.W
{ _T("MD"), _T("Av"), 0, Membkpt, _T("Remove memory breakpoint") }, // Remove memory breakpoint
{ _T("HR"), _T("A"), HB_ACCESS, Hwbreak, _T("HW break on access") }, // HW break on access
{ _T("HW"), _T("A"), HB_WRITE, Hwbreak, _T("HW break on write") }, // HW break on write
{ _T("HE"), _T("A"), HB_CODE, Hwbreak, _T("HW break on execution") }, // HW break on execution
{ _T("HD"), _T("a"), HB_FREE, Hwbreak, _T("Remove HW breakpoint") }, // Remove HW breakpoint
// Stepping and tracing commands.
//{ _T("STOP"), _T(""), VK_F12, Keystrk, _T("Pause execution") }, // Pause execution
//{ _T("PAUSE"), _T(""), VK_F12, Keystrk, _T("Pause execution") }, // Ditto
//{ _T("RUN"), _T(""), 0, Runprog, _T("Run program") }, // Run program
//{ _T("G"), _T("a"), 0, Runprog, _T("Run till address") }, // Run till address
//{ _T("GE"), _T("a"), 1, Runprog, _T("Run and pass exception") }, // Run and pass exception
//{ _T("S"), _T(""), 0, Stepper, _T("Step into") }, // Step into
//{ _T("SI"), _T(""), 0, Stepper, _T("Step into") }, // Ditto
//{ _T("SO"), _T(""), 1, Stepper, _T("Step over") }, // Step over
//{ _T("T"), _T("a"), 0, Tracing, _T("Trace in till address") }, // Trace in till address
//{ _T("TI"), _T("a"), 0, Tracing, _T("Trace in till address") }, // Ditto
//{ _T("TO"), _T("a"), 1, Tracing, _T("Trace over till address") }, // Trace over till address
//{ _T("TC"), _T("S"), 0, Tracing, _T("Trace in till condition") }, // Trace in till condition
//{ _T("TOC"), _T("S"), 1, Tracing, _T("Trace over till condition") }, // Trace over till condition
//{ _T("TR"), _T(""), VK_F9, Ctrlkey, _T("Till return") }, // Till return
//{ _T("TU"), _T(""), VK_F9, Altkeyd, _T("Till user code") }, // Till user code
// Table window commands.
//{ _T("LOG"), _T(""), _T('L'), Altkeyd, _T("View Log window") }, // View Log window
//{ _T("MOD"), _T(""), _T('E'), Altkeyd, _T("View Modules window") }, // View Modules window
//{ _T("MEM"), _T(""), _T('M'), Altkeyd, _T("View Memory window") }, // View Memory window
//{ _T("CPU"), _T(""), _T('C'), Altkeyd, _T("View CPU window") }, // View CPU window
//{ _T("CS"), _T(""), _T('K'), Altkeyd, _T("View Call Stack") }, // View Call Stack
//{ _T("BRK"), _T(""), _T('B'), Altkeyd, _T("View Breakpoints window") }, // View Breakpoints window
//{ _T("OPT"), _T(""), _T('O'), Altkeyd, _T("Open Options") }, // Open Options
// Application commands.
//{ _T("EXIT"), _T(""), _T('X'), Altkeyd, _T("Quit OllyDbg") }, // Quit OllyDbg
//{ _T("QUIT"), _T(""), _T('X'), Altkeyd, _T("Quit OllyDbg") }, // Ditto
// Miscellaneous commands.
//{ _T("OPEN"), _T("S"), 0, Openexe, _T("Open executable file") }, // Open executable file
//{ _T("CLOSE"), _T(""), VK_F2, Altkeyd, _T("Close executable") }, // Close executable
//{ _T("RST"), _T(""), VK_F2, Ctrlkey, _T("Restart current program") }, // Restart current program
//{ _T("HELP"), _T("S"), 0, Heeeelp, _T("Help on API function") }, // Help on API function
//{ _T("H"), _T("S"), 0, Heeeelp, _T("Help on API function") }, // Ditto
// My commands.
{ _T("ASM"), _T("S"), 0, LineAsm, _T("Assemble (if command needs it's own addres, \"ASM COMMAND\;ADDRESS\")")}, // Assemble
{ _T("DASM"), _T("S"), 0, LineDsm, _T("Disassemble immediate opcode") }, // Dump at address
//{ _T("FR"), _T(""), _T('R'), CtlDasm, _T("Find reference to selected command/address")}, // Find Reference to selected command/address
//{ _T("AC"), _T(""), _T('A'), CtlDasm, _T("Analyse code") }, // Analyse Code
//{ _T("SN"), _T(""), _T('N'), CtlDasm, _T("Search for Name(label) in current module") }, // Search for Name(label) in current module
//{ _T("SOB"), _T(""), _T('O'), CtlDasm, _T("Scan object files") }, // Scan OBJect files
// Macro command
{ _T("MAC"), _T("S"), 0, LoadMac, _T("Execute Macro Command") }, // Execute Macro Command
{ _T("OSC"), _T("S"), 0, GoScrpt, _T("Execute OllyScript script") }, // Execute Macro Command
// Calculator and watch commands.
{ _T("CALC"), _T("V"), 0, Express, _T("Estimate expression") }, // Estimate expression
{ _T("?"), _T("V"), 0, Express, _T("Estimate expression") }, // Ditto
//{ _T("WATCH"), _T("S"), 0, Addwtch, _T("Add watch expression") }, // Add watch expression
//{ _T("W"), _T("S"), 0, Addwtch, _T("Add watch expression") }, // Ditto
{ _T(""), _T("V"), 0, Express, _T("Estimate expression") } // Ditto
};

Command Bar v3.20.110.rar

[招生]科锐逆向工程师培训(2024年11月15日实地,远程教学同时开班, 第51期)

上传的附件:
收藏
免费 1
支持
分享
最新回复 (1)
雪    币: 30
活跃值: (1347)
能力值: ( LV2,RANK:10 )
在线值:
发帖
回帖
粉丝
2
哥们你的代码也不对劲啊!
2014-5-26 11:07
0
游客
登录 | 注册 方可回帖
返回
//