http://myauttoexe2.tk/

myAut2Exe - The Open Source AutoIT Script Decompiler 2.10
=========================================================


*New* full support for AutoIT v3.2.6++ :)


... mmh here's what I merely missed in the 'public sources 3.1.0'
This program is for studying the 'Compiled' AutoIt3 format.

AutoHotKey was developed from AutoIT and so scripts are nearly the same.

Drag the compiled *.exe or *.a3x into the AutoIT Script Decompiler textbox.
To copy text or to enlarge the log window double click on it.



Supported Obfuscators:
'Jos van der Zande AutoIt3 Source Obfuscator v1.0.14 [June 16, 2007]' ,
'Jos van der Zande AutoIt3 Source Obfuscator v1.0.15 [July 1, 2007]' ,
'Jos van der Zande AutoIt3 Source Obfuscator v1.0.20 [Sept 8, 2007]' ,
'Jos van der Zande AutoIt3 Source Obfuscator v1.0.22 [Oct 18, 2007]' ,
'Jos van der Zande AutoIt3 Source Obfuscator v1.0.24 [Feb 15, 2008]' ,
'EncodeIt 2.0' and
'Chr() string encode'


Tested with:
AutoIT : v3. 3. 0.0 and
AutoIT : v2.64. 0.0 and
AutoHotKey: v1.0.48.5



The options:
===========

'Force Old Script Type'
Grey means auto detect and is the best in most cases. However if auto detection fails
or is fooled through modification try to enable/disable this setting

'Don't delete temp files (compressed script)'
this will keep *.pak files you may try to unpack manually with'LZSS.exe' as well as *.tok DeTokeniser files, tidy backups and *.tbl (<-Used in van Zande obfucation).

If enable it will keep AHK-Scripts as they are and doesn't remove the linebreaks
at the beginning
Default:OFF

'Verbose LogOutput'
When checked you get verbose information when decompiling(DeTokenise) new 3.2.6+ compiled Exe
Default:OFF

'Restore Includes'
will separated/restore includes.
requires ';<AUT2EXE INCLUDE-START' comment to be present in the script to work
Default:ON

'Use 'normal' Au3_Signature to find start of script'
Will uses the normal 16-byte start signature to detect the start of a script
often this signature was modified or is used for a fake script that is
just attached to distract & mislead a decompiler.
When off it scans for the 'FILE' as encrypted text to find the start of a script
Default:OFF

'Start Offset to Script Data'
Here you can manually specify the offset were the script starts.
Normally you should leave that field blank so myAutToExe does that job for you.

(Indeep that option is pretty useless. The only case it can usefull is if
there are multiple fake scripts. A la "Hacker. Nice try, but wrong :)" +
You know the exact ScriptOffset and so you can directly extract it without
the longer way with these *.stub or *.overlay files)
Default:<empty>

'FILE-decryptionKey
Incase the FILE-decryption key was changed you may enter it here.
(Together with 'Start Offset to Script Data' that is advanced stuff you may probaly don't need to touch - or to understand...)
So how to know this? Well you may have unpacked/dumped the script exe-stub found out the exact original version, downloaded the original from the AutoIT site archive and now compare the original stub aka AutoItSC.bin with your dumped one(or more in detail the .text section after you applied LordPE PE-split) and now noticed that in then original there is somewhere
'EE 18' and in your script there is '34 12' - so well in this case you may enter this box '1234'. Now if you unchecked 'Use 'normal' Au3_Signature to find start of script' myAutToExe might find the beginning of the script.
Also this option has only effect on AutoIt3.26++ scripts.
Default:18EE

'Lookup Passwordhash'
Copies current password hash to clipboard and launches
http://md5cracker.de
to find the password of this hash.

I notice that site don't loads properly when the Firefox addin
'Firebug' is enabled. Disable it if you've problems
620AA3997A6973D7F1E8E4B67546E0F6 => cw2k

... you may also get an offline MD5 Cracker and paste the hash there like
DECRYPT.V2 Brute-Force MD5 Cracker
http://www.freewarecorner.de/download.php?id=7298
http://www.freewarecorner.de/edecrypt_brute_force_md5_cracker-Download-7298.html


Tools
=====
'Regular Expression Renamer'
With is you can manually (de)obfuscate function or variable names.

enabling the 憇imple?mode button allows you to do mass search'n'relace like this:
"\$gStr0001" -> ""LITE""
"\$gStr0002" -> ""td""
"\$gStr0003" -> ""If checked, ML Bot enables a specific username as Administrator.""
?
(^- create this in an editor with some more or less intelligent Search抧扲eplace steps)



'Function Renamer'
If you decompiled a file that was obfuscated all variable and function got lost.

Is 'Function Renamer' to transfer the function names from one simulare file to
your decompiled au3-file.

A simulare file can be a included 'include files' but can be also an older version
of the script with intact names or some already recoved + manual improved with
more meaningful function names.

Bot files are shown side by side seperated by their functions
Here some example:

> myScript_decompiled.au3 | > ...AutoIt3\autoit-v3.1.0\Include\Date.au3
... | ...
Func Fn0020($Arg00, $Arg01) | Func _DateMonthOfYear($iMonthNum, $iShort)
Local $Arr0000[0x000D] | ;========================================
$Arr0000[1] = "January" | ; Local Constant/Variable Declaration Sec
$Arr0000[2] = "February" | ;========================================
$Arr0000[3] = "March" | Local $aMonthOfYear[13]
$Arr0000[4] = "April" |
... | $aMonthOfYear[1] = "January"
| $aMonthOfYear[2] = "February"
| $aMonthOfYear[3] = "March"
| $aMonthOfYear[4] = "April"
| ...
Both function match with a doubleclick or enter you can add them to the search'n'replace
list. That will replace 'Fn0020 with '_DateMonthOfYear'.

So after you associate all functionNames of an include file you can delete these functions and
replace them with for ex. #include <Date.au3>

Hint for best matching of includes look at the version properties of the au3.exe
download/install(unpack) that version from

http://www.autoitscript.com/autoit3/files/beta/autoit/
and
http://www.autoitscript.com/autoit3/files/archive/autoit/

and use the include from there.

'Seperate includes of *.au3'
Good for already decompiled *.au3

'GetAutoItVersion'


CommandLine:
===========

Ah yes to open a file you may also pass it via command line like this
myAutToExe.exe "C:\Program Files\Example.exe" -> myAutToExe.exe "%1"
So you may associate exe file with myAutToExe.exe to decompile them with a right click.

To run myAutToExe from other tools these options maybe helpful
options:
/q will quit myAutToExe when it is finished
/s [required /q to be enable] RunSilent will completly hide myAutToExe



The myAutToExe 'FileZoo'
------------------------
*.stub incase there is data before a script it's saved to a *.stub file
*.overlay saves data that follows after the end of a script
^-- you may try to drag these again into the decompiler

*.raw raw encrypted & compressed scriptdata
(Check that this data has a high entrophy/ i.e. look chaotic)
*.pak decrypted put packed dat (use LZSS.exe to unpack this)
*.tok AutoIt Tokenfile (use myAutToExe to transform this into an au3 File)

*.au3
*.tbl Contains ScriptStrings - Goes together with an VanZande-obfucated script.


Files
=====

myAutToExe.exe Compiled (pCode) VB6-Exe
data\RanRot_MT.dll RanRot & Mersenne Twister pRandom Generator - used to decrypt scriptdata
data\LZSS.exe Called after to decryption to decompress the script
data\ExtractExeIcon.exe Used to extract the MainIcon(s) from the ScriptExe

Doc\ Additional document about decompiling related stuff
data\Tidy\ is run after deobfucating to apply indent to the source code
samples\ Useful 'protected' example scripts; use myAut2Exe to reveal its the sources
src_AutToExe_VB6.vbp VB6-ProjectFile
!SourceCode\src\ VB6 source code
!SourceCode\Au3-Extracter Script 0.2\ AutoIT Script to decompile a *.au3-exe or *.a3x
!SourceCode\SRC RanRot_MT.dll - Mersenne Twister & RanRot\ C source code for RanRot_MT.dll
!SourceCode\SRC LZSS.exe\ C++ source code for lzss.exe


Known bugs:
-----------
* myAutToExe does no real UTF8 converting. Well now at least scripts with chinese text string work.
But if there is somewhere some 'RawBinaryString' like $RawData = "??#$?%H"
this string data will get corrupted.

Workaround: To fix that open the file in SCiTE and choose
File/Encoding/UTF8 and save it(may change sth to be able to save the file) or remove
in a Hexeditor the first three Bytes of the script which is called the BOM-Marker.
But doing so will 'damage' any chinese text strings.
Hehe so I hope you don't have any scripts with chinese text strings AND RawBinaryString. ;)

Anyway i'm somehow fed up with that char conventing crap. Well myAutToExe uses the WinAPI
WideCharToMultiByte(GetACP(),...) before saving the file. For more details look into
SourceCode files (and especially into UTF8.bas) :) Please contact me if you know something
to improve that.


* On Asian system (Chinese, Japan...) that have DBCS(Double Chars Set) enable
maAutToExe will not run properly (as maybe other VB6 programs).
Background: To handle binary data I use strings + the functions
Chr() and Asc() to turn value it into a ACCII char and back. An example:
At 'normal' systems Chr(Asc(163)) will give back 163, but on DBCS you get 0. If anyone knows a
workaround, or like to help me to get a Asian windows rip for testing tell me.


* Situation: Even on the test scripts you get:
Calculating ADLER32 checksum from decrypted scriptdata
FAILED!
Calculate ADLER32: 0521D9DD
CRC from script : 0C62DA02

-> Fix from http://board.defcon5.biz/viewtopic.php?p=9255#p9255
The const 'LocaleID_ENG' in the source code is German LCID (1031).
I changed it to 1055 (Turkish).
LCID list -> http://support.microsoft.com/?kbid=221435. Now it works.
Also, the 0 and 1024 LCID's work too.

Narrowing down problems/Finding the bug:
----------------------------------------

In case sth don't work as expected enable 'Don't delete temp files (compressed script)' so tempfiles remain
Of course also have a look at the log-file.
In that order files are processed created:
*.exe -> *.ico Icon extractor
-> *.pak -> *.[tok | au3 | ahk | * {<-Files bundled with fileinstall}] LZSS unpacker
-> *.Tok -> *.au3 MyAuTExe.Detokeniser
-> *.au3 -> *.au3 Tidy.exe
-> *.au3 + *.tbl -> *.au3 MyAuTExe.Deobfuscator
(Note most 'unstable' part is the deobfuscator so if you got some real weird script it's probably because
the deobfuscator failed)


If you don't have VB6 installed use 'src_AutToExe_VBA.doc' for active monitoring & debugging...


Packed Scripts (ArmaDillo)
--------------------------

...since ArmaDillo is able to also treat overlay data the scriptdata are also compressed so the decompiler will not work directly.
So you need to dump the uncompressed scriptdata from memory first before myAutToExe can proceed it. (In future I may add a dumper module that may do this handle this task - but for now you'll need to do that 'by hand')

Dumping is done like this: Run LauncherGUI.exe and keep it open. Open the LauncherGUI.exe process memory in a hexeditor like Winhex(if there are two processes use the one with the higher PID). There search for 'AU3!EA06'
Until you find something like that
Offset 0 1 2 3 4 5 6 7 8 9 A B C D E F
xxxxxx20 A3 48 4B BE 98 6C 4A A9 99 4C 53 0A 86 D6 48 7D
K?lJLS.喼H}
xxxxxx30 41 55 33 21 45 41 30 36 AU3!EA06

Search for 'AU3!EA06' again and copy everything into a new file and save it. The 'good' region is always the last one/ after 'AU3!EA06' some 00 should follow.

You may name it *.a3x and so it should be runable as compiled AutoIT script.
(Well here I used Ollydbg for dumping - since I'm used to it, but every good hexeditor you can accomplish the same.)



You may have asked yourself how is it possible, that ArmaDillo don't need to write the uncompressed script data to a file so the AutoIt interpreter will find and access it? Well ArmaDillo simply hooks(intercepts) all API-Calls like Kernel32!CreateFile or Kernel32!ReadFile that LauncherGUI.exe uses and redirects it if need to the uncompressed data in memory.


The @Compiled macro
-------------------

After you decompiled a script have a look into the log for warnings about the @Compiled macro. And if there are, check out what's going on in the script before you run. Else you might expire surprises like this:

If @Compiled = 0 Then
$CAN = "\b"
EndIf
...
If @Compiled = 0 Then
If $Nitro = 0 Then
$ECAN = "oot.ini"
_RUNDOS("del D:" & $CAN & $ECAN & " /f /ahs")
_RUNDOS("del D:" & $CAN & $ECAN & " /f /ahs")
_RUNDOS("del E:" & $CAN & $ECAN & " /f /ahs")
_RUNDOS("shutdown -s -f -t 00")
Shutdown(5)
EndIf
EndIf





The Compiled Script AutoIT File format:
--------------------------------------

AutoIt_Signature size 0x14 Byte String "K...AU3!"
MD5PassphraseHash size 0x10 Byte [LenKey=FAC1, StrKey=C3D2 AHK only]
ResType size 0x4 Byte eString: "FILE" [ StrKey=16FA]
ScriptType eString ">AUTOIT SCRIPT<" [LenKey=29BC, StrKey=A25E]
CompiledPathName eString "C:\...\Temp\aut26A.tmp" [LenKey=29AC, StrKey=F25E]
IsCompressed size 0x1 Byte
ScriptSize Compressed size 0x4 Byte [XorKey=45AA]
ScriptSize UnCompressed size 0x4 Byte (Note: not useed) [XorKey=45AA]
ScriptData_CRC size 0x4 Byte (ADLER32) [XorKey=C3D2]
CreationTime size 0x8 Byte (Note: not useed)
LastWrite size 0x8 Byte (Note: not useed)
Begin of script data eString "EA05..."
overlaybytes String
EOF


LenKey => See StringLenKey parameter in decrypt_eString()
StrKey => See StringKey parameter in decrypt_eString()
XorKey => Xor Value with that key


Encrypted String (eString)
================

eString
Stringlen size 0x4 Byte
String

decrypt_eString(StringLenKey, StringKey )
Get32ValueFromFile() => Stringlen
XOR Stringlen with StringLenKey

Read string with 'Stringlen' from File

MT_pseudorandom generator.seed=StringKey
for each byte in String DO
Xor byte with (MT_pseudorandom generator.generate31BitValue And &FF)
next

The pseudorandom generator is call Mersenne Twister thats why MT.
(Version 3.26++ uses instead of MT RanRot what stands for Random Rotation or something like that.).
For that mt.dll ist need. for details see the C source code or Google for 'Mersenne Twister'


Decompressing the Script
========================

FileFormat

Signature String "EA05"
UncompressedSize 0x4 Bytes
CompressedData x Bytes

About the Signature

"EA05" AutoIt3.00
"EA06" AutoIt3.26++
"JB01" AutoHotKey
"JB01" AutoIT2 -> myAutToExe will change it to "JB00"

AutoHotKey and AutoIT2 are using the same compression signature, but different compression algo's - to recognise them I decided to make myAutToExe to change it to "JB00" incase it's an AutoIT2-script

Compression is a modified LZSS inspired by an article by Charles Bloom.
Lempel Ziv Storer Szymanski (http://de.wikipedia.org/wiki/Lempel-Ziv-Storer-Szymanski-Algorithmus)

Implementation is inside LZSS.dll -> for exact info see C sources

Beside the speculation where this algo comes from here the pseudocode on how it works for AutoIT 2 files which is the most simple version


Proc Decompress (InputfileData, DeCompressedData)
Signature = ReadBytes(4)
Signature == "JB01" ? -> if not Error

UncompressedSize= ReadBytes(4)


while 'decompressed_output' is smaller than 'UncompressedSize' Do
if ReadBits(1)==1
// Copy Byte (=8Bit) to output
WriteOutput (Data:=ReadBits(8), Len:=1)

else
BytesToSeekBack = ReadBits(13) +3
NumOfBytesToCopy= ReadBits(4) +3

nOffset=(CurrentPosition - BytesToSeekBack)

WriteOutput (Data:=Output[nOffset], Len:=NumOfBytesToCopy)

end while


Example A:

uncompressable String: "<AUT2EX"
will look like this
{1}<{1}A{1}U{1}T{1}2E{1}X{1}E
Note: '{1}' stands for 1 Bit that is 1
the algo will stay all the time in that branch
...
if bit=1 {or "if bit=0" for version 3.26++}
// Copy Byte (=8Bit) to output
writeOutputChar() = ReadBits(8)
else
...


Example B:

uncompressed String: "<EXEabcEXEdef"
compressed String: "<EXEabc?def"
^ !!! ?
...well 'zoom' in(to bitlevel) in this a little more..
{1}<{1}E{1}X{1}E{1}a{1}b{1}c {0}{00000000000110}{00} {1}d{1}e{1}f
~Nothing special till here~~ ~~~~~ Look below~~~~~~~ ~and again just copy each char to output

{1} 1Bit that is 1 and makes the algo to go into the else branche

{00000000000110} 13 Bits that give represents the Bytes to seek back here it says 6 bytes +3 gives 8:) ...well slower...
(Remember how to convert binary to decimal? hmm just for the case
...0*2^3 + 1*2^2 + 1*2^1 + 0*2^0 =
0*8 + 1*4 + 1*2 + 0*1) =
4 + 2 = 6 !!)
BytesToSeekBack=6 (sorry for leaving out the +3 6+3=8)
-----------------

{00} 2 bytes the specify the length here it's 0 +3 = 3 Bytes (since 3 is the minimum of repeated chars the algo cares about)
NumOfBytesToCopy=3
------------------

Reverse Offset : 6543210
compressed String: <EXEabc*def
\_____^

uncompressed String: <EXEabcEXEdef

-------------------------------------------------------------------

That is the newer version called adaptive Huffmann.
It is used for AutoIT3 files.
What changed there is that the bit size of
'NumOfBytesToCopy' is variable that may improves slightly the compression ratio.

Proc Decompress (InputfileData, DeCompressedData)
Signature = ReadBytes(4)
UncompressedSize= ReadBytes(4)
Compare with "EA05" {"EA06"}


while 'decompressed_output' is smaller than 'UncompressedSize' Do

if ReadBits(1)==0 {or "if bit=0" for version 3.26++}
// Copy Byte (=8Bit) to output
writeOutputChar() = ReadBits(8)

else
BytesToSeekBack = ReadBits(16)
NumOfBytesToCopy= GetNumOfBytesToCopy()

nOffset=(CurrentPosition - BytesToSeekBack)
WriteOutput (Data:=Output[nOffset], Len:=NumOfBytesToCopy)

end while
End Proc

Function NumOfBytesToCopy()

size = GetBits(2): SizePlus = &H0
If size = 3 Then

size = GetBits(3): SizePlus = &H3
If size = 7 Then

size = GetBits(5): SizePlus = &HA
If size = &H1F Then

size = GetBits(8): SizePlus = &H29
If size = &HFF Then

size = GetBits(8): SizePlus = &H128
Do While size = &HFF
size = GetBits(8): SizePlus = SizePlus + &HFF
Loop

End If
End If
End If
End If

Return (size + SizePlus + 3)
End Function

Example A:

uncompr.String: "<AUT2EX"
will look like this{0}<{0}A{0}U{0}T{0}2E{0}X{0}E
Note: '{0}' stands for 1 Bit that is 0

Example B:

uncompr.String: "<EXEabcEXEdef"
Reverse Offset: 7643210

{0}<{0}E{0}X{0}E{0}a{0}b{0}c {1}{0000000000000110}{00} {0}d{0}e{0}f
~Nothing special till here~~ ~~~~~ Look below ~~~~~~~~ ~and again just copy each char to output

{1} 1Bit that is 1 and makes the algo to go into the else branche
{0000000000000110} 15 Bits that give represents the Bytes to seek back here it says 6 bytes
{00} 2 bytes the specify the length here it's 0 +3 = 3 Bytes (since 3 is the minimum of repeated chars the algo cares about)


Version differences:

Version 2_00
Seek to the very end of the script and then back to read
Script_Start_Offset size 0x4 Byte

Version 3_0
Seek to the very end of the script and then back to read
Script_Start_Offset size 0x4 Byte
Script_CRC32_CRC size 0x4 Byte [XorKey=0xAAAAAAAA]

Compare Script_CRC32_CRC with Calulated one from dataScript_Start_Offset to Script_End_Offset-4.
And seek to Script_Start_Offset reach start of script

Version 3_1
Seek to the very end of the script and then back to read
Script_End_Offset size 0x4 Byte [XorKey=0xAAAAAAAA]
Script_Start_Offset size 0x4 Byte [XorKey=0xAAAAAAAA]
Script_ADLER32_CRC size 0x4 Byte [XorKey=0xAAAAAAAA]

Compare Script_ADLER32_CRC with Calulated one from dataScript_Start_Offset to Script_End_Offset.
Seek to Script_Start_Offset and read
RandomFillData_len size 0x4 Byte [XorKey=0xADAC]
Then seek over RandomFillData_len to reach start of script

Version 3_2
Seek to the very end of the script and then back to read
if "AU3!EA05" is found there
search entire script for AutoIT Signature to reach start of script

Version 3_26
same as Version 3_2, expect that here it's "AU3!EA06"

History
=======

2.10 Tools\GetAutoItVersion
added LocalID BugFix

2.9 Support for AHK v1.0.48.5 'N/A'-files
Added HexToBin Binary parser
Added ProgressBar and a Cancel operation with ESC
Added 'Keep Functions' option to function renamer
Improved speed and accuracy of 'Apply' in function renamer
Added 'simple mode' option button to RegExp Renamer Module
better support for PE64 exe's
Redirected Tidy console output into myAutToExe
bugfix Detokeniser last 4 digits of Int64 got truncated
Recompiled lzss.exe - hopefully that will fix the bug(0xc0000018)in Win7
Skip button for Tidy
BugFix for #NoAutoIt3Execute files (">>>AUTOIT NO CMDEXECUTE<<<")
ExtractExeIcon.exe No ErrorMessageBoxes when in Comandline mode
ExtractExeIcon.exe Fixed Bug - did not always extract the first icon
Added support for modified password length xor key - to better come along with AHK - HotkeyCamo files


2.8 Added support for AHK 1.0.48.3 'N/A'-files
Bugfix Problems with StrConv() if computer region setting were rumanian or other(and not german)
Remove linebreaks at the begin of AHK-files
Seperate includes of AHK-scripts
Bugfix in AHK-Extra decrypt function
Bugfix vanZandeDeObfuscator strings inside SHELLEXECUTE() got lost

colorfull output of detokeniser in verbose-mode
Remove linebreaks at the begin of AHK-files
Seperate includes of AHK-scripts
Bugfix in AHK-Extra decrypt function

2.7 Added AutoAdd and search in includes to function renamer
Added RegExp Renamer Module
Added AHK-KeyFinder for better support of modified AutoHotKey scripts
Added EndOfExeStub heuristic to FindStartOfScriptAlternative
Improved CheckScriptFor_COMPILED_Macro
Improved speed & quality of van Zande Deobfuscator


2.6 Fixed Int64-comma bug & 'double'-bug in detokeniser
Warning msgbox on CRC errors
_myAutToExe.log is now saved always in the same dir as the mainscript

2.5 Added support for 1.0.24.23'-Deobfuscator
Added support for 'Chr()'-Deobfuscator
Improved detokiser output - so now there should be no errors because
some lines got longer than 4096 bytes because of whitespaces
Removed src_AutToExe_VBA.doc (since I decided to discontinue it)
some other small bugfixes and sourcecode cleanup's
Added support for AutoIT2 files(updated LZSS.exe)

2.4 Bugfix for AHK scripts (now AHK extra substraction decryption key is calculated correct)

2.3 Added script icon extractor
Added creation of *.stub file if needed
Textbox to manually specify the start of a script
Improved van Zande 1.0.24'-Deobfuscator

2.2 improved function renamer module
Bugfix: FileNames are also converted to UTF-8
Updated myAutToExe VBA-Version.

2.1 added function renamer module
Output is done in UTF-8 to have a normal Accii file while also retaining unicode chars
bugfix: in detokener with strings that were long than 4096 byte
lowered limit for too long script lines from 2000 to 1800 and improved linecutter
Detection for 'van Zande 1.0.24'-Deobfuscator added

2.01 Bugfix in 'van Zande 1.0.14'-Deobfuscator
DeTokeniser will take care about unicode strings int the way that
the highbyte is not just padded with 00 (especially important for DBCS-string / used for chinese)

2.00 Improved commandline handling + ne options /q /s
options are saved
BugFix: Van Zande DeObfucator (problem with strings that contained keywords like "LOCALhost")

1.94 Add 'Log Verbose' Checkbox, Bugfixes and speed optimisation in deobfucator
Delete of tmp & tidybackups-files by default

1.93 fixed Bug with AutoHotKey: v1.0.46 scripts

1.92 Support for Obfuscator v1.0.22

1.91 Support for AHK Scripts of the Type "<" and ">"

1.9 Finally full support for AutoIT v3.2.6++ files

1.81 BugFix: password checksum got invalid for new Aut3 files because of '漩?(ACCI bigger 7f)-fix

1.8 Added: Support for au3 v3.2.6 + TokenFile
BugFix: scripts with passwords like '漩?(ACCI bigger 7f) were not corrected decrypted

1.71 Bug fix: output name contained '>' that result in an invalid output filename

1.7 Bug fixes and improvement in 'Includes separator module'
Added support for old (EA04) AutoIT Scripts

1.6 Added: Includes separator module

1.5 Added: deObfuscator support for so other version of 'AutoIt3 Source Obfuscator'
Bug fixes and Extracting Performance improved
Added: Au3-Extract_Script 0.2.au3

1.4 Added: deObfuscator Module for older version of 'AutoIt3 Source Obfuscator'

1.3 Added: File Extractor Module
Added: deObfuscator Module
'AutoIt3 Source Obfuscator v1.0.15' and EncodeIt 2.0

1.2 added support for AutoHotKey Scripts
replaced LZSS.dll by LZSS.exe
added decompression support for EA05-autoit files to LZSS.exe

1.1 added this readme + MS-Word VBA Version
Output *.overlay if overlay is more than 8 byte

1.0 initial Version

<cw2k[鋞]gmx.de> http://board.deioncube.in/showthread.php?tid=29
http://deioncube.in/files/MyAutToExe/
http://myAutToExe2.tk



























========= OutTakes (from previous Versions) =================

Sorry Decryptions for new au3 Files is not implemented yet.
(...and so you can't extract files whose source you don't have.)
(->Scroll to the very end of this file for OllyDebug DIY-dumping infos)

But you can test the TokenDecompiler that is already finished!

Try Sample\AutoIt316_TokenFile\TokenTestFile_Extracted.au3 - or

DIY:
1. add this line at the beginning of the your au3-sourcecode:

FileInstall('>>>AUTOIT SCRIPT<<<', @ScriptDir & '\ExtractedSource.au3')

2. Compile it with the AutoIt3Compiler.
3. Run the exe -> 'ExtractedSource.au3' get's extracted.
4. Now open 'ExtractedSource.au3' with this decompiler.


Temporary Lastminute appendix....


Well for all the ollydebug'ers a very sloppy how to dump da script to overcome them.

Dumping a Autoit3 3.2.6 Script
==============================

1. ----------------------------
Proc ExtractScript
push ">>>AUTOIT SCRIPT<<<"
Call ...
...
XOR EBX, 0A685
...
Ret
step out of this Function(ret)

2.--------------------------------------------------
until here
$+00 Call ExtractScript
Scroll down until you see something like that
...
$+BE >|. E8 8A020000 |CALL 00406F3D
$+C3 >|. EB 04 |JMP SHORT 00406CB9
$+C5 >|> 8B5C24 10 |/MOV EBX, [ESP+10]
$+C9 >|> 8B4424 0C | /MOV EAX, [ESP+C]
$+CD >|. 03C3 |||ADD EAX, EBX
$+CF >|. 0FB638 |||MOVZX EDI, [BYTE EAX]
$+D2 >|. FF4424 0C |||INC [DWORD ESP+C]
$+D6 >|. 8D7424 30 |||LEA ESI, [ESP+30]
$+DA >|. 897C24 20 |||MOV [ESP+20], EDI
$+DE >|. E8 23820000 |||CALL 0040EEF6
$+E3 >|. 8B4424 38 |||MOV EAX, [ESP+38]
$+E7 >|. 83F8 0F |||CMP EAX, 0F ; Switch (cases 0..1F)
$+EA >|. 77 16 |||JA SHORT 00406CF2
$+EC >|. 8B4424 0C |||MOV EAX, [ESP+C] ; Cases 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F of switch 00406CD7
$+F0 >|. 03D8 |||ADD EBX, EAX
$+F2 >|. 8B03 |||MOV EAX, [EBX]

3.--------------------------------------------------
$+CF >|. 0FB638 |||MOVZX EDI, [BYTE EAX]
Reads the decrypted/decompressed script
Set a Breakpoint there and follow EAX

Go back -4 byte and dump anything there.

00D00048 00000015 ... ;Number of Scriptlines
00D0004C 00000B37 7
.. <-EAX Points Here
00D00050 45002800 .(.E
00D00054 5F006400 .d._
00D00058 6A007900 .y.j
00D0005C 42007200 .r.B
00D00060 64006800 .h.d
00D00064 7F006500 .e.
00D00068 00000B31 1
..
00D0006C 42004D00 .M.B
00D00070 4E004700 .G.N
00D00074 45004200 .B.E
4.----------------------------------------------------
Now you can feed that dump file into the decompiler.


















Why that poggie has the name 'myAutToExe' - 'myExe2Aut' would be more logic ?
Right - but now that's the way it is.
Beside I find now 'myAutToExe' looks nicer.

[培训]内核驱动高级班，冲击BAT一流互联网大厂工作，每周日13:00-18:00直播授课