还是不行,我把主要的设置贴出来:
1、在我主机上“端口设置”的“每秒位数”为115200;”数据位“为8;“奇偶校验”为无;”停止位“为1,“流控制”为无;
2、在VM的"Virtual Machine Settings"设置里的“Use named pipe"下面三项的内容分别为:\\.\pipe\com_1、This end is the client、The other end is an application
3、VM右下角的Serial Port亮了;在VM里的boot.ini的内容为:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /debug /debugport=com1 /baudrate=115200